Download User Manual - Support Sagemcom
Transcript
Taking Over the Line If you pick up on an additional telephone and the machine continues to ring or attempts to receive a fax, you can disconnect the machine from the line. Press ** on the additional telephone. Changing Codes Easylink Codes 1 2 3 4 5 Only change the codes if it is absolutely necessary. The codes must begin with * or # and must be different. Press OK, 54 and OK. Enter the new code for starting fax reception. Confirm with OK. Enter the new code for taking over the line on an additional device. Confirm with OK. Using an External Answering Machine For the best operation, the answering machine must be connected to the EXT socket of the device. The numbers of rings set for the external answering machine should be less than the one set under FAX RINGS by at least two. Example of the setting: Number of rings of the external answering machine ......1 FAX RINGS .............................................................. 3 TOTAL RINGS ......................................................... 5 (also see Chapter Setting the Fax Switch, Page 18) External Answering Machine The outgoing message should be shorter than ten seconds. Avoid music in the outgoing message. If the external answering machine has a “conserving function” (i.e. a function that changes the number of rings as soon as new messages have been recorded), switch it off. If the external answering machine records fax signals, but your device cannot receive faxes, inspect the connection of the external answering machine 21