1
Download Ektron CMS400.NET Administrator Manual
Transcript
Using eSync Sync Configurations Several eSync configurations are shown below. You can synchronize any server to or from any other server with one important exception: you cannot initiate a sync from a server outside the firewall. You can only initiate a sync from a server inside the firewall and copy to a server outside the firewall. This is because the outside server does not know the address of servers inside the firewall. However, you can use a staging server to push and pull updated information to and from a production server. IMPORTANT! All eSync transmissions use port 8732. This is not configurable. Configuration 1: One Staging Server, One Production Server This is the most basic eSync configuration, showing one staging and one production server. Each server has a database and one site. The eSync feature can automatically create a production server from your staging server. See Also: ”Using eSync to Initialize a New Site” on page 1324 For installation instructions for this configuration, see ”Scenario 2: Synching an Ektron CMS400.NET Server with Another Server” on page 1264. Configuration 2: One Development Server, One Staging Server, One Production Server This configuration includes a development server. Developers can use it to create new features and modify existing ones. When they are done, they can sync the changes to the staging server, where the changes can be verified before being moved to production. Ektron CMS40 0.NET Admini strator Manua l, Version 7 .6 Re v 12 1306
