Download Newsletter
Transcript
I/O Terminal Block [NEW] difference. terminal block Autonics I/O terminal blocks & cable environment by introducing various connector transmission cable series. The series will guarantee high compatibility with higher controllers (PLC) for easier wiring works. Developed with Autonics 35-year accumulated technology - New Autonics terminal block series. Experience the difference now. NEW [Relay terminal block] ABS Series [Sensor connector terminal block] AFE Series Major features Major features Easy wiring works and significant time saving combined with sensor connector(compatible with e-CON) ● Unnecessary wire stripping and specific tools ● Space saving mounting with compact size ● Easy check for operation status and for cable break by adopting LED signal ● Two ways of mounting(DIN Rail, bolt fix) ● Selectable NPN/PNP input (NPN/PNP switching Switch) ● Supports CJ Series(Connector transmission cable) ● Suitable to drive various loads using output signals of PLC ● Easy check for operation status and for cable break by adopting LED signal ● Available 2 types of relay [TAKAMISAWA(Fujitsu) NYP/MATSUSHITA(Panasonic) PA] - Support TWO WAY EJECTOR (for relay replacement) ● Two ways of mounting(DIN Rail, bolt fix) ● Supports CJ Series(Connector transmission cable) ● Ordering information AB S H 16 PA N N Varistor installation Ordering information Input logic AF E4 H 20 16 L F Case type LED Number of sensor connectors Number of pins Connector type Connector type Relay type F Full Case L LED 16 32 16pcs 32pcs 20 40 20pin 40pin H Hirose connector Number of relays Connector type Terminal type Item E4 Sensor connector 4PIN Socket Item Model Model AFE4-H20-16LF AFE4-H40-32LF Power supply Rated current 12-24VDC Max. 1A (※1) Number of sensor connectors Tightening torque 16pcs 32pcs Max. 0.8N.m (※1) LED current of terminal is included in Rated current No install C N P TN PA 04 16 32 S H S Non-COM NPN (COM+) PNP (COM-) TAKAMISAWA(Fujitsu) NYP MATSUSHITA(Panasonic) PA 04pcs 16pcs 32pcs Screw Hirose connector Screw AB Relay terminal block Major specifications AF Interface terminal block Major specifications N Rated voltage Rated load voltage & current PA type Power consumption TN type Output type Number of output Terminal pitch Applicable wires Tightening torque ABS-S04PA-CN ABS-S04TN-CN ABS-H16PA-NN(PN) ABS-H16TN-NN(PN) 24VDC ±10% ABS-H32PA-NN(PN) ABS-H32TN-NN(PN) 250VAC 3A, 30VDC 3A (※1) (2A/1point, 8A/1 COM) Max. 10.5mA (※1) / Max. 15.5mA (※3) Max. 8.5mA (※1) / Max. 13.5mA (※3) 1a contact relay output 32point 16point (8point/1COM) 7.62mm Min. 1.25mm² 0.4 ~ 0.6N.m 250VAC 3A, 30VDC 3A (※1) Max. 10.5mA (※2) Max. 8.5mA (※2) 4point (※1): Relay contact capacity for resistive load. (※2): The power consumption including LED current by one relay. (※3): The power consumption including LED current of power. of CJ Series released Series PLC connector Terminal block connector Conductor characteristic Insulation diameter Cable diameter Rated voltage CJ Series HIF3BA-20D-2.54R, HIF3BA-40D-2.54R, D-SUB 37P, FCN-367J040-AU/F HIF3BA-20D-2.54R, HIF3BA-40D-2.54R 7/0.127mm(AWG 28)×20P, 7/0.127mm(AWG 28)×10P 0.12mm Ø7.2mm Max. 1A ※ Standard specification for cable length is 1m or 2m and cable length can optional MITSUBISHI MELSEC Q, MELSEC AnS, MELSEC A, MELSEC F LSIS GLOFA-GM, XGB, XGT LP-S044, LP-S070, PMC-1HS, PMC-2HS, PMC-2HSN, PMC-2HSP Autonics RS Automation NX700, NX70, N700, N70 Supports YOKOGAWA FA-M3 device FUJI MICREX-F KDT CIMON_CM1 OMRON C200, C500, CQM1, CJ1, CS1 TELEMECHANIQUE M340, TWIDO 03 Autonics Newsletter