Download User Manual

Installation
Driver Information
Supported Features
•
Supports 64 Host Bus Adapters (HBAs)
•
Supports 1-gigabyte (Gb), 2-Gb or 4-Gb link attachments
•
Supports Peripheral Component Interconnect (PCI)-X 2.0 and PCI-Express HBAs
•
Supports 256 LUNs per target
•
Supports persistent logical unit number (LUN) automapping (for more information, see “LUN
Automapping” on page 15)
•
Supports consistent target ID via persistent binding (for more information, see “Setting Up
Persistent Binding” on page 16)
•
Dynamic loading and unloading of the driver module via Dynamic Loadable Kernel Module
(DLKM)
•
Parameter setting via the configuration file (lpfc.conf)
•
Crash dump trace analysis support
•
Supports ServiceGuard high-availability clustering
•
Supports HBA hot/plug/hot swap through On-Line Add/Replace (OLRAD) compliance using the
'olrad' utility
•
Hazard tested
Prerequisites
•
HP-UX 11i version 2 (HP-UX 11.23) (64-bit)
•
64 MB system random access memory (RAM)
•
Installed Emulex Fibre Channel (FC) HBA
Compatibility
•
Emulex FC HBAs LP11002e and LP11000e (minimum firmware version 2.50a8)
•
Emulex FC HBAs LP11002 and LP11000 (minimum firmware version 2.10a7)
•
Emulex FC HBAs LP10000DC and LP10000DC (minimum firmware version 1.90a4)
•
Emulex FC HBAs LP9802 and LP9802DC (minimum firmware version 1.90a4)
•
Emulex FC HBAs LP9002 and LP9002DC (minimum firmware version 3.90a7)
Driver for HP-UX - User Manual
Page 1