Download Leveloader Gold User Manual

Transcript
Leveloader Gold User Guide
NOTE
After plugging in the USB device, if
the Found New Hardware Wizard
does not automatically appear,
proceed to the Manual USB
Installation instructions in
Section 5.4.
5.2 USB Installation for Windows Vista
1) Plug the USB Optical Reader or PC Interface cable into the desired PC. The
system will automatically detect the connected unit and start the ‘Found New
Hardware’ Wizard.
2)From the provided list select “Locate and install driver software
(recommended)”.
Figure 5-7 Found New Hardware Window
3) On the next screen select, “I don’t have the disc. Show me other options.”
Figure 5-8 Found New Hardware - USB Serial Port Window
Page 5