Download User Manual - PID Eng&Tech

MICROACTIVITY – REFERENCE
The change in programmed
session does not occur.
The inhibition function has been
triggered, as a safety measure in
response to a system alarm.
The communication parameters are not
correct.
PC and Microactivity are not
communicating
The cable is not connected.
User Manual
This function is automatically shutdown
when the situation triggering the alarm has
been resolved, except in the case of
pressure alarms. In this case, check the
alarm and reset it (if the situation that
triggered it has been resolved).
Check the communication parameters in
your PC (Network Connections) and in the
Microactivity Reference.
Check the IP address Process@ is reading
in “Project” menu.
Check the cross cable is connected. If the
unit and the PC are connected through a
local network, the cable must be straight,
not crossed.
147