Download DR5000 Manual - iProcesSmart.com

Warning Symbol
This
Symbol calls attention to an operating procedure, practice, or
the like, which, if not correctly performed or adhered to, could result
in personal injury or damage to or destruction of part or all of the
product and system. Do NOT proceed beyond a warning symbol
until the indicated conditions are fully understood and met.
Use the Manual
Installers
Read Chapter 1, 2, 3
System
Read All Chapters
NOTE:
It is strongly recommended that a process should incorporate
a LIMIT like Future Design’s L91 which will shut down the
equipment at a preset process condition in order to preclude
possible damage to products or system.
Information in this user's manual is subject to change without
notice.
Copyright May 2003, Future Design Controls, all rights reserved.
No part of this publication may be reproduced, transmitted,
transcribed or stored in a retrieval system, or translated into any
language in any form by any means without the written permission
of Future Design Controls.
Future Design Controls
7524 West 98th Place
Bridgeview, IL 60455
Phone
888-751-5444
Fax
888-307-8014
E-mail
[email protected]
Website
www.futuredesigncontrols.com
Tech. Support 866-342-5332
2