Download User manual for

Elnec s. r. o.
Note: H/L/read SmartProg2 driver
C1
H/L/read driver
in programmer
PU/PD driver
in programmer
R1
pin of ISP
connector
R2
C1=1nF, R1=1k3, R2=22k
Selftest
If you feel that your programmer does not react according to your expectation, please run the
programmer selftest using Diagnostic pod, enclosed in the standard delivery package.
Insert 40 pins diagnostic pod - type I into ZIF socket of the programmer. 40 pins
diagnostic pod - type I must be inserted as 40 pins device.
Run selftest of programmer in PG4UW (menu Programmer / Selftest).
Technical specification
HARDWARE
Programmer
two D/A converters for VCCP and VPP, controllable rise and fall time
VCCP range 2...7V/350mA
VPP range 2...25V/200mA
USB 2.0/1.1 compatible interface
selftest capability
50