Download WaveTest User`s Manual

WaveTest User’s Manual
Specifications
System Requirements
Connection to host computer:
•
10BASE-T Ethernet, RJ-45 jack
Supported host computers configuration
•
•
•
•
•
•
IBM PC compatible,
800 MHz processor or greater
Minimum 256 Mbytes of memory
500 Mbytes available disk space
CD drive
minimum 10/100 Base-T network adapter.
Operating System
•
MS Windows XP Professional
Timing
System Reference: All timing referenced to internal clock of Test Point configured as Master
Synchronization of Test Points: Clock system of each slaved Test Point synchronized to within 500 ns of the
Master
Synchronization of Frames Between Slaved Test Points: Frames from multiple test points are synchronized to
within 500 ns
Interframe Spacing: Adjustable from 8 µs to 4 seconds
Trigger Input Response Time: 70 µs max from receipt of trigger signal to execution of sequence command
Trigger Output Delay Time: 70 µs max from execution of sequence command to output of trigger signal
Power Consumption
Input Power to each Test Point is provided by an external power supply
Input voltage: 120/240Vac max
Input current: 0.2 A max at 120 VAC / 0.1 A max at 240 VAC
Input power frequency: 47 Hz – 63 Hz
Standby power consumption: 12 watts
Active power consumption: 13 watts
Radio Specification
Transmit power: +15 dBm max.
©VeriWave, Inc. All rights reserved.
143