Download User manual

Clock programs - browsing, adding, deleting
With the freely programmable 24 hour/7 day clock you can
drop the temp. for certain lengths of time.
OPERATING INSTRUCTION:
H1 Automatic
Outdoor -15°C
SupplyTemp52°C
Selection
Press ESC until the display no longer changes.
You are then in the "Selection" display shown in the adjoining picture.
Press OK.
H1 Select
Heating curve
Settings
Measurements
Info water temp
Control modes
Clock functions
Language/Keel
Clock functions
Time/ Date
H1 drop program
00:00
_ _ _
00:00
_ _ _
DropOnH1
_ _ _ _
Drop OFF
_ _ _ _
19:30 DropOnH1
_ _ _ _ _ _ _
00:00 Drop OFF
_ _ _ _ _ _ _
19:30 DropOnH1
MoTuWeThFr_ _
00:00 Drop OFF
_ _ _ _ _ _ _
19:30 DropOnH1
MoTuWeThFr_ _
04:30 Drop OFF
_ _ _ _ _ _ _
MoTuWeThFr _ _
04:30 Drop OFF
MoTuWeThFr _ _
00:00 DropOnH1
_ _ _ _ _ _ _
00:00 Drop OFF
_ _ _ _ _ _ _
etc.
Press the
button to move cursor to "Clock functions”. Press OK.
Press the
button to move cursor to the regulating circuit whose time
controls you want to access (browse, add or delete). Press OK.
Browse/ location for additional programming:
Press the
button to browse the clock programs which have been
made. If you want to make additional programs, move cursor to first
empty program block.
Set the start time for the temp. drop program: Press OK.
Temperature drop start time hours blink.
Press the - or + button to set hours. Press OK.
Minutes blink. Press the - or + button to set minutes. Press OK.
Set the weekdays (when the start time is effective):
Press the - or + button to select weekday.
The day is left unselected/ press the - -button to delete the selection.
The selection shown on the display is taken into use with the OK button.
Make your selection for each day and press OK.
Set the end time for the temp. drop program: Press OK.
Hours blink. Press the - or + button to set hours. Press OK.
Minutes blink. Press the - or + button to set minutes. Press OK.
Set the weekdays (when the end time is effective):
Press the + button to select weekday.
The day is left unselected/ press the - to delete the selection.
The selection shown on the display is taken into use with the OK button.
Make your selection for each day and press OK.
There is always one program block inside the brackets (drop on and off).
The cursor moves to the beginning of the next program block (new brackets).
Continue programming as before or exit with ESC.
In the example the drop is in effect during the workweek between 19:30 and
4:30. On the weekend the drop begins on Friday evening at 19:30 and
ends on Monday morning at 4:30.
19:30
_ _ _
04:30
_ _ _
14
DropOnH1
_ _ _ _
Drop OFF
_ _ _ _
DELETING THE PROGRAM BLOCK:
You can delete the program block inside the brackets by deleting the
weekdays in that program block with the - button.