Download "user manual"

Control Panel Functions (Continued)...
Load Machine Setting
Default: 1
<
>
Enter
This menu allows you to load the saved default into the current settings
(Y origin, feed rate, traverse, Z-up, Z-down, etc.) from the EEPROM.
Press the X
key on the keypad to decrease default number.
Press the X
key on the keypad to increase default number.
Press the Z
key on the keypad to go to the next menu function.
Press the Z
key on the keypad to go to the previous menu function.
Press the
key on the keypad to confirm the selection.
Press the
key on the keypad to return to the jogging menu.
27