Download DeviceNet Master Module: JW-50DN2

JW-D324NH to D325MH
Appendix 2: JW-D324NH/D322SH/D325SH/D322MH/D325MH
This section gives the names and functions of each part of the JW-D324NH/D322SH/D325SH/D322MH/
D325MH (hereafter referred to as "this slave").
Appendix 2-1: Names and functions of each part
⑧
②
①
⑦
④
⑤
⑥
⑨
③
1 Indicator lamp
Shows communication, input, and output status for the DeviceNet. => App-22 and App-23.
2 Terminal block cover
Protects the terminal block.
3 Terminal block (38-pin, detachable type, M3.5 x 7 screws)
Connect the power supply, input and output cables.
4 Common terminal (20-pin)
5 Module installation holes (ø4: 2 positions)
Holes for installing a module using M3 screws.
6 DIN rail lever
Used to install and remove the module on a DIN rail.
7 Switch (with cover)
Assigns a node address for the DeviceNet.
=> App-21.
8 DeviceNet communication connector
Connect a DeviceNet communication cable
One communication cable connector is supplied with each slave module.
9 Jumper
Installed on the JW-D324NH/D322SH/D325SH.
App-20