1
Download GK 3000 Variable Frequency Drive User Manual
Transcript
Shenzhen Gozuk Co., Limited www.gozuk.com F6 F6 F7 F2 F5 F1 F7 F2 F5 F1 d1 F1 d1 d2 PLC running F3 F3 F4 F4 T1 T2 T3 T4 T5 T6 T7 T1 T2 T3 T4 T5 T6 T7 T1 First cycle Second cycle Running command Stopping command Fig.6-42 PLC continuous cycle 3: Continuous cycle The VFD automatically starts a new cycle after one cycle finish until receiving stopping command shown as Fig.6-43. LED ten's place: PLC restart mode selection 0: Restart from the first stage after stop caused by stopping command, fault or power failure. 1: Restart from the freq. of break stage. After stop caused by stopping command or fault, the VFD will record the running time completed of restarts from break stage and runs at set freq. of break stage in rest time of break stage shown as Fig.6-43. -114-
