Download GK 3000 Variable Frequency Drive User Manual
Transcript
Shenzhen Gozuk Co., Limited V/F curve www.gozuk.com Five ways: constant torque V/F curve, 1 kind of user defined V/F curve , 3 kinds of down torque curve(2.0/1.7/1.2times the power) Two ways: linear Acc./Dec., S-curve Acc./Dec.;7 kinds of Acc./Dec. curve Acc./Dec. time, time unit (minute/second) optional, max. Time: 6000 minutes. DC braking start frequency: 0~15.00Hz DC braking Energy consuming braking Jog running PI built-in Multi-stage speed running Textile swing frequency Auto voltage regulation Auto energy braking time: 0~60.0seconds braking current: 0~80% Energy consuming braking unit built-in, external braking resistor can be Jog frequency range: 0.1Hz~50.00Hz, JOG Acc./Dec. time: 0.1~60.0s Easily constitute a close loop control system Multi-stage speed running available through built-in PLC or control terminals Swing frequency available with preset and center frequency adjustable When the grid voltage changes, to maintain constant output voltage Saving energy by auto optimizing V/F curve according to the load saving running Auto current limiting Auto current limiting to prevent frequent over current fault trip Fixed-length control VFD stops when reaches the preset length RS485 standard communication port available, support MODBUS Communication communication protocol of ASCII and RTU, master-slave multi-machine interaction function available Running Control panel: control terminal: serial port: 3 channels switchable command channel Control panel potentiometer : ▲, ▼control panel keys: ;function Frequency Runni setting channel ng functi on code digital: serial port : terminal up/down: analog voltage: analog current: pulse: combination setting: all channels switchable Switch input FWD/REV command: 8channels programmable switch channel 35kinds of function can be set separately Analog input channel 4~20mA: 0-10V: 2 optional analog inputs Analog output 4~20mA or 0~10V optional, setting frequency and output channel frequency , etc. can be output - 12 - inputs,