Download 1 - HP

chug.bk : ch03 Page 78 Tuesday, November 25, 1997 12:49 PM
Redialing manually
By factory default, the HP LaserJet 3100 product automatically
redials busy numbers up to five times at specified intervals. It does
not redial if there is no answer.
If you want to send another document to the last fax number dialed,
use this procedure to redial. If you are trying to resend the same
document you sent the first time, you will probably want to wait until
the automatic redials have stopped or you have stopped them
yourself. Otherwise, the recipient may get the fax twice: once from
this manual redial attempt and once from one of the automatic redial
attempts.
Note
To stop the current redial attempt for a fax, see “Canceling the current
fax job” in this chapter. To cancel all pending, automatic redial attempts
for a fax, see “Canceling a fax job using Job Status” in this chapter.
Note
To change the number of redials or time between redials, see
“Adjusting autoredial” and “Adjusting the time between redials” in
chapter 8.
To redial manually
78 3 Faxing
1
Load the document into the document feeder tray.
2
Press REDIAL/PAUSE.
3
Press START. The HP LaserJet 3100 product redials the last
number and attempts to send the fax.
EN