Download Advanced User`s Guide

4.2. DANFOSS LIVING CONNECT ELECTRONIC THERMOSTAT
45
Figure 4.10: Danfoss Electronic Thermostat - configuration window
• Node ID - Unique device number within the Z-Wave network,
• EndPointID - Multichannel devices number
• Wake up interval - Time interval for HC2 to communicate with the thermosat (60 seconds at the minimum)
4.2.1
Specifications
• Radio frequency: 868.42MHz
• Actuator type: Electromechanical
• Recommended use: Household
• Mechanical strength: 70N
• Max. water temperature: 90 ◦ C
• Estimated battery life: 2 years
• Temperature measurement cycle: every 60 seconds
• Power supply: 2x1,5V AA battery
• Power consumption: 3mW in standby, 1,2W when active,
• Ambient temperature: from 0 ◦ C to 40 ◦ C
• Available temperature settings: from 4 ◦ C to 28 ◦ C
• IP 20 - should not be used in hazardous installations or in places where it
will be exposed to water