Download CapiScope HVCS User Guide Preface

KK Technology CapiScope HVCS User Guide
Introduction
This manual provides operating instructions and guidelines for the CapiScope HVCS
Handheld Video Capillary Microscope .
A battery powered notebook computer is necessary to use The CapiScope HVCS.
Assumptions
The instructions in this manual assume that the user has been trained in the proper use of
the CapiScope HVCS and that he or she has the required medical education and
experience to operate this equipment safely and effectively.
Intended Use
The CapiScope HVCS is intended solely for the visualization and characterization of the
microcirculation system of the surface of the skin and other sites such as mucosal tissue.
No diagnostic or therapeutic claims are made for the device.
The CapiScope HVCS is intended for invasive and transient use ( continuous use < 60
minutes ). It is not intended for surgically invasive use.
System Requirements
The CapiScope HVCS requires a battery powered notebook computer running Windows
XP, Windows 7,8, 32bit or 64bit, a USB 2.0 port and a viewing screen. A processor
running at least 1.6 GHz and 1 Gbyte RAM is recommended. The computer must not
have any electrical connections to other devices. If powered from a mains supply, the
power supply must be IEC60601-1 compliant.
30/03/2015
hvcs-UG20150329.odm
Page 3