Download User Manual - SAMWONTECH

SAMWONTECH
SYMBOL
Item
Function
INPUT SET
Parameter setting related with input sensor type and
sensor input of sub channel
OUTPUT SET
Parameter setting related with output type and output of
sub channel
ALARM&HBA
Parameter setting related with alarm signal and heater
disconnection of sub channel
PID group
Parameter setting related with PID of sub channel
Communication
Parameter setting related with communication of sub
channel
DO CONFIG
Parameter setting related with I/O board relay output
signal of sub channel
INITIALSETTING
Sub channel initial setting
Channel change
Refer to
[Fig. 22-1 Sub channel parameter setting screen] with
setting the system parameter in main or sub channel.
Remarks
22.2 System parameter setting procedure
▶ The system parameter setting procedures which shall be preferentially treated in product installation are
as follows.
Setting
SYMBOL
Item
Function
Remarks
sequence
① Temperature sensor tie setting
INPUT SET
PAGE 156
1
② Sensor use scope setting
③ Other parameter setting
① Output type setting
OUTPUT SET
② Output direction setting
PAGE 161
2
③ Other parameter setting
3
DO CONFIG
4
Communication
DO CONFIG Parameter setting
PAGE 163
Parameter setting
PAGE 165
2nd Edition of TEMP2000M_Series IM : April. 8. 2014
Page 156 / 176