Download QUICK GLOVE RINGS - Dir

QUICK DRY GLOVE SYSTEM
* QUICK AND VERSATILE SYSTEM FOR DRY GLOVES.
* SIMPLE TO DON AND DOFF WITHOUT ASSISTANCE.
* BY MINIMIZING THE CONDUCTIVITY AND
RESTRICTION OF THE BLOOD FLOW YOUR HANDS STAY
WARMER WHICH MAKES DIVING MORE ENJOYABLE.
60230
60232
60230
set: QUICK GLOVE RINGS
Versatile connecting rings keeps your prefered glove
fastened without o-rings or cement. Combine with
any of three docking systems: #60930, #60910 or #60215.
60231
80185
This set of dryglove adapters work by friction and are sqeezed
onto any of the three docking systems.
Parts list: Doffing is made by turning the release ring.
60231
CONNECTION RING "COMFORT"
60232
RELEASE RING "COMFORT"
+ Spanner rings #60211and #60212 and o-ring #80185, see below
2 spare o-rings (Jan. 2005) and Pressure Equaliztion Tubes
60945
10-pack: QUICK COMBO SETS
Combination of Quick Glove Rings and Quick Clamp.
Only sold by SI TECH AB in boxes of 10 combo sets.
Contains all of 60230 and all of 60930.
60930
60930
QUICK CLAMP, SET
Simply clamp onto fixed latex cuffs.
60931
60910
Combine with Quick Glove Rings.
Parts list:
60931
DOCKING RING (FOR QUICK CLAMP)
+ Spanner rings #60212, #60214 and #60219, see below
60910
60420
61100
Parts list:
60200
60420
61100
60200
60215
60215
60216
QUICK CUFF, SET
Enables latex seal exchange without cementing when
permanently installed.
Can be combined with Quick Glove Rings.
STIFF RING
WRIST RING, PU
BOTTLE NECK SEAL SIZE MEDIUM
HEAT ACTIVATED MELCO TAPE
set: QUICK GLOVE DOCKING RINGS
FOR RUBBER CUFF RING
Enables docking of Quick Glove Rings to rubber cuff
ring #60400 and similar rings.
60217
60216
60217
60214
60212
60211
80185
© SI TECH January 2005
Parts list:
CUFF FIX RING FOR 60400
CUFF ATTACHMENT RING
SPARE PARTS FOR QUICK DRY GLOVE SYSTEM
60211
60212
60214
60219
80185
SPANNER RING SMALL
SPANNER RING LARGE
SPANNER RING MEDIUM
SPANNER RING EXTRALARGE
O-RING 90x2,5
93.8 mm
94.8 mm
94.3 mm
95.6 mm
BLACK
BLUE
YELLOW
GREEN
®
WRIST RINGS AS SEPARATE PARTS
60400
60400
RUBBER CUFF RING
Combine with stiff ring #60200 to keep cuffs in place.
Gloves can be secured with rubber band #61117.
60402
Manufacturers set: 2x60400 + 2x60200 (one set/suit)
60215 + 60400
60400 can also be attached to Quick G.love Rings ,set #60230,
if combined with Q.G. Docking rings #60215 (set), replacing #60200.
60216+60217=60215
60200
60420
60200
STIFF RING
Combine with cuff ring #60400 or wrist ring #60420.
60420
WRIST RING, polyurethane
Combine with stiff ring #60200 to keep cuffs in place.
See Quick Cuff #60910 for more applications.
60422
Manufacturers set: 2x60420 + 2x60200 (one set/suit)
(Please note! Quick Cuff (60420+60200) is designed to be used with SI
TECH bottle beck seals (below) If using thinner seals (at rear end) they
may not provide adequate sealing. Thicker seals may cause the PU
material in ring #60420 to expand permanently.)
Latex wrist seal BOTTLE NECK
The most comfortable wrist seal available. The sealing part is extremely
long, thin (0,6-0,9 mm), very supple and slightly tapered for optimum
comfort and sealing. Guide ribs for trimming. The exposed part is short
to avoid damage and dipped to obtain a heavier attachment part.
61090
Large
for wrist cm: 18-21
inch: 7,2-8,4
61100
Medium for wrist cm: 15,5-18,5
inch: 6,2-7,4
61130
Small
for wrist cm: 13,5-16
inch: 5,4-6,4
61150
X Small
for wrist cm: 12,5-14
inch: 5,0-5,5
M
XS
L
SI TECH special manufacturing technique supports the unique
latex formula that provides excepionally supple seals and
provides extra strength to exposed areas and the attachment end.
61250
HD
ND
Latex wrist seal PRO
New design to fit the widest sleeves and more trimming guide ribs.
ND min. 0,7 mm. A) Front: 620mm B) Rear: 144 mm C) Length: 228 mm
61300
B
A
C
61250
61200
61300
Cuff PRO, dual thickness (rear end HD)
Cuff PRO Heavy Duty
Heavy Duty, HD: 1,3-1,9 mm
Cuff PRO ND
Normal Duty, ND: 0,6-0,9 mm
EXTENDED MODEL (only on special request, no stock item)
ND min. 0,7 mm. A) Front: 540 mm B) Rear: 174 mm C) Length: 280 mm
61250EX
61200EX
61300EX
© SI TECH May 2005
®
DRY GLOVES FOR COMFORT AND DEXTERITY
60360
PVC GLOVES, resistant to many contaminating agents
60360 Froggy glove, size 10
High dexterity, good cut resistance.
CE0120, CE1/EN420 CE3/EN374
60365 Snorkel glove, size 10
Good dexterity, high cut resistance.
CE 0493 (wash and tumble dry)
60390
SHOWA GLOVES WITH SEPARATE LINER
For ultimate comfort and dexterity.
60370 Medium (ladies)
60380 Large
60390 X Large
60396
SHOWA SEPARATE LINER (washable)
60395 Medium (ladies)
60396 Large
60397 X Large
61110
LATEX 5-FINGER GLOVE
Durable and resistant to many contaminating agents.
61110 Size 10
61111 Size 11
61115
LATEX MITTEN
Heavy Duty for tough working conditions.
61115 One-size mitten
61117
RUBBBER BAND
61115
Secure latex gloves 61110, 61111 and 61115 to rubber cuff ring #60400.
61117 Rubber band order unit: piece
61117
61116
LATEX MITTEN, S&R
special cut, used to temporarily protect a more vulnerable interior glove
61116 Mitten, Search & Rescue cut
60380
61116
Combining of Froggy or Showa gloves (as above) and S&R mitten
61116, fitted simultaneously into the ”Quick Glove rings” (#60220 or
60230) gives high dexterity and temporarily increased cut resistance as
well as quick donning and doffing. Ideal for search and rescue use.
All gloves on this page can be fitted to Quick Glove Rings, set
#60230.
Latex gloves 61110, 61120 and mitten 61115 can be used with
Quick Cuff instead of the wrist seal.
(Please note! Using gloves or Heavy Duty seals in stead of normal
thickness seals may cause the PU material in ring #60420 to expand
permanently after which it may prove difficult to use normal seals.)
© SI TECH May 2005
LATEX WRIST & NECK SEALS & HOODS
Latex wrist seal BOTTLE NECK
The most comfortable wrist seal available. The sealing part is extremely
long, thin (0,6-0,9 mm), very supple and slightly tapered for optimum
comfort and sealing. Guide ribs for trimming. The exposed part is short
to avoid damage and dipped to obtain a heavier attachment part.
M
XS
61090
61100
61130
61150
L
for wrist cm: 18-21
for wrist cm: 15,5-18,5
for wrist cm: 13,5-16
for wrist cm: 12,5-14
inch: 7,2-8,4
inch: 6,2-7,4
inch: 5,4-6,4
inch: 5,0-5,5
Latex wrist seal PRO
61250
HD
Large
Medium
Small
X Small
New design to fit the widest sleeves and more trimming guide ribs.
ND min. 0,7 mm. A) Front: 620mm B) Rear: 144 mm C) Length: 228 mm
ND
61250
61200
61300
61300
B
A
C
61650
Cuff PRO, dual thickness (rear end HD)
Cuff PRO Heavy Duty
Heavy Duty, HD: 1,3-1,9 mm
Cuff PRO ND
Normal Duty, ND: 0,6-0,9 mm
EXTENDED MODEL (only on special request, no stock item)
ND min. 0,7 mm. A) Front: 540 mm B) Rear: 174 mm C) Length: 280 mm
61250EX
61200EX
61300EX
Latex neck dam BELLOW
Slightly tapered, comfortable top with guide ribs for trimming.
Attachment part, diameter 26,5 cm.
61650
Small
for neck cm: 24-32
inch: 9,5-12,5
61651
Medium
for neck cm: 28-37
inch: 11-14,5
61652
Large
for neck cm: 35-43
inch: 13,5-17
61700
61500
Latex neck dam FLAT
The rear end, diameter 26 cm, is thicker than the top.
Normal duty:
61500
Medium
neck cm: 36-41
inch:14-16,5
61700
Small
neck cm: 24-35
inch: 9,5-14
SI TECH special manufacturing technique supports the unique
latex formula that provides excepionally supple seals and
provides extra strength to exposed areas and the attachment end.
FACE SEAL
61900
Normal duty, for rubber and trilaminate suits or to mend neoprene hoods.
61900
Face seal
Un-cut
latex
61901
Face seal
Cut/pce
latex
61920
Face seal
Un-cut
chloroprene
61921
Face seal
Cut/pce
chloroprene
WARNING!
Latex may cause allergic reactions.
SI TECH latex formula is TNTD-free
and the leaching process reduces
allergenic agents (latex proteins) to a
non-detectable level. However, sensitive
people may react to any latex.
LATEX HOODS
61410
61805
SPORT
61410 Medium, flared
TURBO
INNER HOOD with att. tabs
61800 Large (narrow neck)
61810 Medium (narrow neck)
© SI TECH January 2005
61806 with TABS Large (wide neck)
61805 with TABS Medium (wide neck)
®
DRYSUIT REPAIR AND MAINTENANCE
FRICTION TAPE
61350
Non-sealing, preglued, non-flexible fabric.
Bias cut when covering joints on rubber suits.
61350
61351
61353
Friction tape, width 25 mm
Friction tape, width 25 mm
30m/coil
1 meter
NEOPRENE TAPE
A strong and slightly flexiblle rubber tape for waterproof sealing
of seams. Must be rubbed prior to gluing.
61352
61353
61361
61354
Neoprene tape, width 25 mm
Neoprene tape, width 25 mm
Neoprene tape, width 38 mm
1 meter
ca 22 m/coil
ca 22 m/coil
MELCO, HEAT ACTIVATED PU TAPE
Preglued non-sticky surface. Heat activated with a hair dryer or
air gun. Ideal to cover joints that are difficult to access.
61354
61355
61359
Melco tape, width 22 mm
Melco tape, width 22 mm
Melco tape, width 32 mm
100m/coil
1 meter
1 meter
DRYSUIT ZIPPERS
Small quantities of zippers (genarally 89-92 cm AL in stock) available for
repair shops etc. Other lengths may be available although not generally
in stock. STD/Normal duty (8 teeth/inch) or Heavy Duty (6 teeth/inch).
Ask for quotation for HD or non magnetic zippers.
AL
AL
62100
62201
61357
Zipper STD - specify length
Zipper HD - specify length
ZIPPER WAX
Each bar is individually packed in a zip-lock plastic bag
61357
Zipper wax, bar 50 gram
TALCUM POWDER BAG
62370
Each talcum bag is individually packed in a zip-lock plastic bag.
Body sweat and ozone are the worst enemies to all latex products.
Protect all latex parts with talcum after carefully washing and
rinsing and store in a, dark and dry place.
62370
Talcum powder bag, 70 gram
DRY SUIT BOOTS
61643
61824
NON INSULATED BOOTS, Scandinavian size
61641
38-39
61642 40-41
61643
42-43
61644 44-45
INSULATED NEOPRENE BOOTS, 4,5 mm neoprene
US size and European/Scandinavian size
61824
US 6 S 37
61826
US 7,5 S 40
61828
US 8,5 S 41
61832
US 11 S 45
© SI TECH January 2005
E!es! k.
L
SAall sinz g stoc
Sm nini
ma
Re
®
NECK RINGS
Suits with wide collars can be combined with a separate
neck seal and a neck ring.
Attachment with a latex hood is optional.
Trim the neck seal #61515, put it on as shown in picture
below (guide lines for trimming on the outside), close the
neck ring #60100 and fold the edge of the seal over the ring.
The bulges on the ring shall fit into the recesses in the neck
seal. Put on the suit and slip the suit neck seal over the
assembly. (If using a latex hood #61420, put it on top of
everything). Secure with the locking ring #60000.
60100
61515
60100
SPLIT NECK RING
60000
LOCKING RING, CPL. for split neck ring
61515
LATEX SEAL, for split neck ring #60100
61420
Latex hood, regular, for split neck ring #60100
60000
61420
WARNING! Latex may cause allergic reactions.
QUICK DAM - Change latex neck seal in an instant
A trimmable PU collar is glued to the suit and a stiff ring is
used to hold the removable neck seal in place. Secured with
an external tension ring. Remove and replace the neck seal
within seconds. Perfect for rental and school suits, as every
user can buy and trim their own removable neck seal.
60920 CPL.
60920
QUICK DAM CPL, SET
Parts included in Quick Dam, set #90200:
61520
60430
60440
60435
60430
60435
60440
61520
61680
Neck Stiff Ring, oval
Tension ring
Chimney, PU (radio frequency weldable, gluable)
Latex neck seal, medium (has a bulge that fits
into a recess in the stiff ring
Optional, ordered separately:
61680
© SI TECH January 2005
Latex hood for Quick Dam
®
64000
EXTEND YOUR BOTTOM TIME
INDEPENDENT SUIT INFLATION SYSTEMS
Cylinder
64000 200BAR #45001 - 0,5 L
64250 200BAR #45001 - 1,0 L
64300 300BAR #45003 - 0,5 L
64400
System valve Reducer valve
#43420 M18x1,5
#50300
#43420 M18x1,5
#50300
#43420 M18x1,5
#50300
CGAARGON:
200BAR #45001 - 0,5 L
#43410 M18x1,5
#50200
Our standard type systems (as show above) have a hose with CEJN type
female quick connector, hose length 25-60 cm.
50300
Product information sheet
with user’s manual available.
11907
Other requirements, i.e. different cylinder size or different type of female
quick connector socket, cylinder volume, low mute/non mag. for military
purpose etc. are available on special request.
(separate information sheet available)
URINE DUMP VALVE
11900
Urine dump valve, (small guide ridge)
Items included in 11900: valve port, exhaust valve with an
attachment nut furnished with a socket and a silicone hose.
Uridomes are attached to the silicone hose. Uridomes and valve port blank
plug (enables diving with detached urine dump valve) are ordered separately.
Disposable uridomes packed individually for best hygiene.
11907
Self-adhesive uridome (disposable) diameter 25 mm
11908
Self-adhesive uridome (disposable) diameter 30 mm
11909
Self-adhesive uridome (disposable) diameter 35 mm
60325
60330
VALVE PORT BLANK PLUG
Plug up the valve port when removing the valve. (Valve port is not included)
(valve port not included )
© SI TECH May 2005
60325
60330
Valve port blank plug, SMALL guide ridge
Valve port blank plug, LARGE guide ridge