Download QUICK GLOVE RINGS - Dir
Transcript
QUICK DRY GLOVE SYSTEM * QUICK AND VERSATILE SYSTEM FOR DRY GLOVES. * SIMPLE TO DON AND DOFF WITHOUT ASSISTANCE. * BY MINIMIZING THE CONDUCTIVITY AND RESTRICTION OF THE BLOOD FLOW YOUR HANDS STAY WARMER WHICH MAKES DIVING MORE ENJOYABLE. 60230 60232 60230 set: QUICK GLOVE RINGS Versatile connecting rings keeps your prefered glove fastened without o-rings or cement. Combine with any of three docking systems: #60930, #60910 or #60215. 60231 80185 This set of dryglove adapters work by friction and are sqeezed onto any of the three docking systems. Parts list: Doffing is made by turning the release ring. 60231 CONNECTION RING "COMFORT" 60232 RELEASE RING "COMFORT" + Spanner rings #60211and #60212 and o-ring #80185, see below 2 spare o-rings (Jan. 2005) and Pressure Equaliztion Tubes 60945 10-pack: QUICK COMBO SETS Combination of Quick Glove Rings and Quick Clamp. Only sold by SI TECH AB in boxes of 10 combo sets. Contains all of 60230 and all of 60930. 60930 60930 QUICK CLAMP, SET Simply clamp onto fixed latex cuffs. 60931 60910 Combine with Quick Glove Rings. Parts list: 60931 DOCKING RING (FOR QUICK CLAMP) + Spanner rings #60212, #60214 and #60219, see below 60910 60420 61100 Parts list: 60200 60420 61100 60200 60215 60215 60216 QUICK CUFF, SET Enables latex seal exchange without cementing when permanently installed. Can be combined with Quick Glove Rings. STIFF RING WRIST RING, PU BOTTLE NECK SEAL SIZE MEDIUM HEAT ACTIVATED MELCO TAPE set: QUICK GLOVE DOCKING RINGS FOR RUBBER CUFF RING Enables docking of Quick Glove Rings to rubber cuff ring #60400 and similar rings. 60217 60216 60217 60214 60212 60211 80185 © SI TECH January 2005 Parts list: CUFF FIX RING FOR 60400 CUFF ATTACHMENT RING SPARE PARTS FOR QUICK DRY GLOVE SYSTEM 60211 60212 60214 60219 80185 SPANNER RING SMALL SPANNER RING LARGE SPANNER RING MEDIUM SPANNER RING EXTRALARGE O-RING 90x2,5 93.8 mm 94.8 mm 94.3 mm 95.6 mm BLACK BLUE YELLOW GREEN ® WRIST RINGS AS SEPARATE PARTS 60400 60400 RUBBER CUFF RING Combine with stiff ring #60200 to keep cuffs in place. Gloves can be secured with rubber band #61117. 60402 Manufacturers set: 2x60400 + 2x60200 (one set/suit) 60215 + 60400 60400 can also be attached to Quick G.love Rings ,set #60230, if combined with Q.G. Docking rings #60215 (set), replacing #60200. 60216+60217=60215 60200 60420 60200 STIFF RING Combine with cuff ring #60400 or wrist ring #60420. 60420 WRIST RING, polyurethane Combine with stiff ring #60200 to keep cuffs in place. See Quick Cuff #60910 for more applications. 60422 Manufacturers set: 2x60420 + 2x60200 (one set/suit) (Please note! Quick Cuff (60420+60200) is designed to be used with SI TECH bottle beck seals (below) If using thinner seals (at rear end) they may not provide adequate sealing. Thicker seals may cause the PU material in ring #60420 to expand permanently.) Latex wrist seal BOTTLE NECK The most comfortable wrist seal available. The sealing part is extremely long, thin (0,6-0,9 mm), very supple and slightly tapered for optimum comfort and sealing. Guide ribs for trimming. The exposed part is short to avoid damage and dipped to obtain a heavier attachment part. 61090 Large for wrist cm: 18-21 inch: 7,2-8,4 61100 Medium for wrist cm: 15,5-18,5 inch: 6,2-7,4 61130 Small for wrist cm: 13,5-16 inch: 5,4-6,4 61150 X Small for wrist cm: 12,5-14 inch: 5,0-5,5 M XS L SI TECH special manufacturing technique supports the unique latex formula that provides excepionally supple seals and provides extra strength to exposed areas and the attachment end. 61250 HD ND Latex wrist seal PRO New design to fit the widest sleeves and more trimming guide ribs. ND min. 0,7 mm. A) Front: 620mm B) Rear: 144 mm C) Length: 228 mm 61300 B A C 61250 61200 61300 Cuff PRO, dual thickness (rear end HD) Cuff PRO Heavy Duty Heavy Duty, HD: 1,3-1,9 mm Cuff PRO ND Normal Duty, ND: 0,6-0,9 mm EXTENDED MODEL (only on special request, no stock item) ND min. 0,7 mm. A) Front: 540 mm B) Rear: 174 mm C) Length: 280 mm 61250EX 61200EX 61300EX © SI TECH May 2005 ® DRY GLOVES FOR COMFORT AND DEXTERITY 60360 PVC GLOVES, resistant to many contaminating agents 60360 Froggy glove, size 10 High dexterity, good cut resistance. CE0120, CE1/EN420 CE3/EN374 60365 Snorkel glove, size 10 Good dexterity, high cut resistance. CE 0493 (wash and tumble dry) 60390 SHOWA GLOVES WITH SEPARATE LINER For ultimate comfort and dexterity. 60370 Medium (ladies) 60380 Large 60390 X Large 60396 SHOWA SEPARATE LINER (washable) 60395 Medium (ladies) 60396 Large 60397 X Large 61110 LATEX 5-FINGER GLOVE Durable and resistant to many contaminating agents. 61110 Size 10 61111 Size 11 61115 LATEX MITTEN Heavy Duty for tough working conditions. 61115 One-size mitten 61117 RUBBBER BAND 61115 Secure latex gloves 61110, 61111 and 61115 to rubber cuff ring #60400. 61117 Rubber band order unit: piece 61117 61116 LATEX MITTEN, S&R special cut, used to temporarily protect a more vulnerable interior glove 61116 Mitten, Search & Rescue cut 60380 61116 Combining of Froggy or Showa gloves (as above) and S&R mitten 61116, fitted simultaneously into the ”Quick Glove rings” (#60220 or 60230) gives high dexterity and temporarily increased cut resistance as well as quick donning and doffing. Ideal for search and rescue use. All gloves on this page can be fitted to Quick Glove Rings, set #60230. Latex gloves 61110, 61120 and mitten 61115 can be used with Quick Cuff instead of the wrist seal. (Please note! Using gloves or Heavy Duty seals in stead of normal thickness seals may cause the PU material in ring #60420 to expand permanently after which it may prove difficult to use normal seals.) © SI TECH May 2005 LATEX WRIST & NECK SEALS & HOODS Latex wrist seal BOTTLE NECK The most comfortable wrist seal available. The sealing part is extremely long, thin (0,6-0,9 mm), very supple and slightly tapered for optimum comfort and sealing. Guide ribs for trimming. The exposed part is short to avoid damage and dipped to obtain a heavier attachment part. M XS 61090 61100 61130 61150 L for wrist cm: 18-21 for wrist cm: 15,5-18,5 for wrist cm: 13,5-16 for wrist cm: 12,5-14 inch: 7,2-8,4 inch: 6,2-7,4 inch: 5,4-6,4 inch: 5,0-5,5 Latex wrist seal PRO 61250 HD Large Medium Small X Small New design to fit the widest sleeves and more trimming guide ribs. ND min. 0,7 mm. A) Front: 620mm B) Rear: 144 mm C) Length: 228 mm ND 61250 61200 61300 61300 B A C 61650 Cuff PRO, dual thickness (rear end HD) Cuff PRO Heavy Duty Heavy Duty, HD: 1,3-1,9 mm Cuff PRO ND Normal Duty, ND: 0,6-0,9 mm EXTENDED MODEL (only on special request, no stock item) ND min. 0,7 mm. A) Front: 540 mm B) Rear: 174 mm C) Length: 280 mm 61250EX 61200EX 61300EX Latex neck dam BELLOW Slightly tapered, comfortable top with guide ribs for trimming. Attachment part, diameter 26,5 cm. 61650 Small for neck cm: 24-32 inch: 9,5-12,5 61651 Medium for neck cm: 28-37 inch: 11-14,5 61652 Large for neck cm: 35-43 inch: 13,5-17 61700 61500 Latex neck dam FLAT The rear end, diameter 26 cm, is thicker than the top. Normal duty: 61500 Medium neck cm: 36-41 inch:14-16,5 61700 Small neck cm: 24-35 inch: 9,5-14 SI TECH special manufacturing technique supports the unique latex formula that provides excepionally supple seals and provides extra strength to exposed areas and the attachment end. FACE SEAL 61900 Normal duty, for rubber and trilaminate suits or to mend neoprene hoods. 61900 Face seal Un-cut latex 61901 Face seal Cut/pce latex 61920 Face seal Un-cut chloroprene 61921 Face seal Cut/pce chloroprene WARNING! Latex may cause allergic reactions. SI TECH latex formula is TNTD-free and the leaching process reduces allergenic agents (latex proteins) to a non-detectable level. However, sensitive people may react to any latex. LATEX HOODS 61410 61805 SPORT 61410 Medium, flared TURBO INNER HOOD with att. tabs 61800 Large (narrow neck) 61810 Medium (narrow neck) © SI TECH January 2005 61806 with TABS Large (wide neck) 61805 with TABS Medium (wide neck) ® DRYSUIT REPAIR AND MAINTENANCE FRICTION TAPE 61350 Non-sealing, preglued, non-flexible fabric. Bias cut when covering joints on rubber suits. 61350 61351 61353 Friction tape, width 25 mm Friction tape, width 25 mm 30m/coil 1 meter NEOPRENE TAPE A strong and slightly flexiblle rubber tape for waterproof sealing of seams. Must be rubbed prior to gluing. 61352 61353 61361 61354 Neoprene tape, width 25 mm Neoprene tape, width 25 mm Neoprene tape, width 38 mm 1 meter ca 22 m/coil ca 22 m/coil MELCO, HEAT ACTIVATED PU TAPE Preglued non-sticky surface. Heat activated with a hair dryer or air gun. Ideal to cover joints that are difficult to access. 61354 61355 61359 Melco tape, width 22 mm Melco tape, width 22 mm Melco tape, width 32 mm 100m/coil 1 meter 1 meter DRYSUIT ZIPPERS Small quantities of zippers (genarally 89-92 cm AL in stock) available for repair shops etc. Other lengths may be available although not generally in stock. STD/Normal duty (8 teeth/inch) or Heavy Duty (6 teeth/inch). Ask for quotation for HD or non magnetic zippers. AL AL 62100 62201 61357 Zipper STD - specify length Zipper HD - specify length ZIPPER WAX Each bar is individually packed in a zip-lock plastic bag 61357 Zipper wax, bar 50 gram TALCUM POWDER BAG 62370 Each talcum bag is individually packed in a zip-lock plastic bag. Body sweat and ozone are the worst enemies to all latex products. Protect all latex parts with talcum after carefully washing and rinsing and store in a, dark and dry place. 62370 Talcum powder bag, 70 gram DRY SUIT BOOTS 61643 61824 NON INSULATED BOOTS, Scandinavian size 61641 38-39 61642 40-41 61643 42-43 61644 44-45 INSULATED NEOPRENE BOOTS, 4,5 mm neoprene US size and European/Scandinavian size 61824 US 6 S 37 61826 US 7,5 S 40 61828 US 8,5 S 41 61832 US 11 S 45 © SI TECH January 2005 E!es! k. L SAall sinz g stoc Sm nini ma Re ® NECK RINGS Suits with wide collars can be combined with a separate neck seal and a neck ring. Attachment with a latex hood is optional. Trim the neck seal #61515, put it on as shown in picture below (guide lines for trimming on the outside), close the neck ring #60100 and fold the edge of the seal over the ring. The bulges on the ring shall fit into the recesses in the neck seal. Put on the suit and slip the suit neck seal over the assembly. (If using a latex hood #61420, put it on top of everything). Secure with the locking ring #60000. 60100 61515 60100 SPLIT NECK RING 60000 LOCKING RING, CPL. for split neck ring 61515 LATEX SEAL, for split neck ring #60100 61420 Latex hood, regular, for split neck ring #60100 60000 61420 WARNING! Latex may cause allergic reactions. QUICK DAM - Change latex neck seal in an instant A trimmable PU collar is glued to the suit and a stiff ring is used to hold the removable neck seal in place. Secured with an external tension ring. Remove and replace the neck seal within seconds. Perfect for rental and school suits, as every user can buy and trim their own removable neck seal. 60920 CPL. 60920 QUICK DAM CPL, SET Parts included in Quick Dam, set #90200: 61520 60430 60440 60435 60430 60435 60440 61520 61680 Neck Stiff Ring, oval Tension ring Chimney, PU (radio frequency weldable, gluable) Latex neck seal, medium (has a bulge that fits into a recess in the stiff ring Optional, ordered separately: 61680 © SI TECH January 2005 Latex hood for Quick Dam ® 64000 EXTEND YOUR BOTTOM TIME INDEPENDENT SUIT INFLATION SYSTEMS Cylinder 64000 200BAR #45001 - 0,5 L 64250 200BAR #45001 - 1,0 L 64300 300BAR #45003 - 0,5 L 64400 System valve Reducer valve #43420 M18x1,5 #50300 #43420 M18x1,5 #50300 #43420 M18x1,5 #50300 CGAARGON: 200BAR #45001 - 0,5 L #43410 M18x1,5 #50200 Our standard type systems (as show above) have a hose with CEJN type female quick connector, hose length 25-60 cm. 50300 Product information sheet with user’s manual available. 11907 Other requirements, i.e. different cylinder size or different type of female quick connector socket, cylinder volume, low mute/non mag. for military purpose etc. are available on special request. (separate information sheet available) URINE DUMP VALVE 11900 Urine dump valve, (small guide ridge) Items included in 11900: valve port, exhaust valve with an attachment nut furnished with a socket and a silicone hose. Uridomes are attached to the silicone hose. Uridomes and valve port blank plug (enables diving with detached urine dump valve) are ordered separately. Disposable uridomes packed individually for best hygiene. 11907 Self-adhesive uridome (disposable) diameter 25 mm 11908 Self-adhesive uridome (disposable) diameter 30 mm 11909 Self-adhesive uridome (disposable) diameter 35 mm 60325 60330 VALVE PORT BLANK PLUG Plug up the valve port when removing the valve. (Valve port is not included) (valve port not included ) © SI TECH May 2005 60325 60330 Valve port blank plug, SMALL guide ridge Valve port blank plug, LARGE guide ridge