Download User Manual

Energy [733]
11.8 View Trip Log [800]
Displays the total energy consumption since the last
energy reset [7331] took place.
Main menu with parameters for viewing all the logged
trip data. In total the VSD saves the last 10 trips in the
trip memory. The trip memory refreshes on the FIFO
principle (First In, First Out). Every trip in the memory is
logged on the time of the Run Time [731] counter. At
every trip, the actual values of several parameter are
stored and available for troubleshooting.
733 Energy
Stp
Unit:
kWh
Range:
0.0–999999kWh
kWh
11.8.1 Trip Message log [810]
Communication information
Modbus Instance no/DeviceNet no: 31034
Profibus slot/index
121/178
Fieldbus format
Long, 1=1 W
Modbus format
EInt
Reset Energy [7331]
Resets the kWh counter. The stored information will be
erased and a new registration period will start.
Display the cause of the trip and what time that it
occurred. When a trip occurs the status menus are copied to the trip message log. There are nine trip message
logs [810]–[890]. When the tenth trip occurs the oldest
trip will disappear.
8x0 Trip message
Stp
h:mm:ss
Unit:
h: m (hours: minutes)
Range:
0h: 0m–65355h: 59m
7331 Rst Energy
Stp
No
Default:
No
Selection:
No, Yes
810 Ext Trip
Stp
132:12:14
For fieldbus integer value of trip message, see message table for warnings, [722].
Communication information
Modbus Instance no/DeviceNet no: 6
Profibus slot/index
0/5
Fieldbus format
UInt
Modbus format
UInt
NOTE: After reset the setting automatically goes back to
“No”.
NOTE: Bits 0–5 used for trip message value. Bits 6–15
for internal use.
Communication information
Modbus Instance no/DeviceNet no: 31101
Profibus slot/index
121/245
Fieldbus format
UInt
Modbus format
UInt
Trip message [811]-[81N]
The information from the status menus are copied to
the trip message log when a trip occurs.
Trip menu
140
Functional Description
Copied from
Description
811
711
Process Value
812
712
Speed
813
712
Torque
814
714
Shaft Power
815
715
Electrical Power
816
716
Current