Download Image Processing Stroboscope BVS-II Wotan

1 Safety Information
1 Safety Information
1.1 General Safety Information
Notes
Please read this manual before using the instrument. It will provide you with
important information on using the instrument and on safety. This will protect
you and prevent damage to the instrument. Pay particular attention to the
basic safety information in CHAPTER 1 and the information on installation,
operation and maintenance in CHAPTER 3.
Please keep this manual in a safe place and make it available to people using
the instrument. Never pass the instrument on without the manual.
In this manual the following graded safety and warning labels are used:
NOTE !
Identifies action required to simplify using the instrument !
CAUTION !
Danger from "Reason for Danger" ! - Identifies the danger caused by an
action which could result in damage to the instrument if it is not avoided !
WARNING !
Danger from "Reason for Danger" ! - Identifies a possible danger resulting
from an action which could lead to death or (serious) injury if it is not avoided !
Intended use
The instrument is intended for laboratory use and for use in an industrial
environment. It may only be used within the limits given in the technical
specifications (refer to CHAPTER 4).
Faultless and safe operation of the instrument depends on correct and proper
transport and storage, installation and assembly as well as careful operation
of the instrument.
When assembling, installing and operating the instrument, the safety and
accident-prevention regulations for the respective use must be adhered to.
Qualification
This instrument may only be operated by persons who are familiar with
electrical measurement equipment and have been instructed in the use of
xenon flashlamps. Please pay attention to the information on safe handling
with xenon flashlamps in SECTION 1.2.
Intervention for maintenance and repair work may only be carried out by the
manufacturer himself or by qualified personnel authorized by the
manufacturer.
Disposal
An instrument which is no longer required must be disposed of according to
local regulations unless otherwise provided for by the manufacturer.
1-1