Download User Manual - Cradlepoint
Transcript
User Manual / MBR1400 10/28/15 NOTE: You can restrict remote access to only specified IP addresses in SECURITY > Zone Firewall > Remote Access Restriction. Allow Remote SSH Access – This will enable SSH access to the router from the Internet. It is only available when SSH access is enabled in the Local Management tab. Some carriers block the remote SSH access ports. If a ping to the router’s WAN port does not work, it is unlikely that remote SSH access will work. FEATURE LICENSES Some Cradlepoint features may require a license. These features are disabled by default. To obtain a feature license, contact your Cradlepoint sales representative. Once you have obtained the feature license file, upload the file to enable the feature. A reboot is required after uploading a feature license file. SYSTEM CLOCK Enabling NTP will tell the router to get its system time from a remote server on the Internet. If you do not enable NTP then the router time will be based on when the router firmware was built, which is guaranteed to be wrong. Whenever the Internet connection is reestablished and once a week thereafter the router will ask the server for the current time so it can correct itself. You then have the option of selecting an NTP server and adjusting the NTP server port. Select the NTP server from the dropdown list. Any of the given NTP servers will be sufficient unless, for example, you need to synchronize your router’s time with other devices in a network. • • Time Zone – Select from a dropdown list. Setting your Time Zone is required to properly show time in your router log. Daylight Savings Time – Select this checkbox if your location observes daylight saving time. LOCAL MANAGEMENT • Enable Internet Bounce Pages – Bounce pages show up in your web browser when the router is not connected to the Internet. They inform you that you are not connected and try to explain why. If you ©2015 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com 69