Download xPC TargetBox™

Connecting Hardware to the xPC TargetBox
layout of the 50 pins depends on which I/O option is internally connected to
which I/O connector on the outside of the xPC TargetBox.
Configuration Label for I/O Options
The layout of the I/O connectors on the xPC TargetBox is the same for all
models and is independent of the I/O options installed in your xPC TargetBox.
The mapping of which I/O option is connected to which I/O connector is listed
on the xPC TargetBox configuration label on the bottom of the xPC TargetBox.
Warning Always unplug the xPC TargetBox when locating the label.
Three additional copies of these labels are in the Read First envelope found in
the upper compartment of the shipping case. These additional labels are for
your reference. You can either use them for your documentation materials or
attach them to your application setup at a convenient location.
2-21