Download SECTION 4 WISVCUP - WINDOWS BASED SET-UP - Sea

SECTION 4
WISVCUP - WINDOWS BASED
SET-UP PROGRAM REFERENCE
M4510 PLC: This option uploads (reads) set-up parameters,
machine timing set-points and shift data from the M4510, only.
S4520 Motion Control: This option uploads (reads) set-up and
tuning parameters from the S4520 Motion Control Board, only.
________________________________________________________
4.2.3 DOWNLOAD PROGRAM
The “Set-up” program allows the user to “Download” any SYSdev
program file to either the M4510 or S4520.
Note: To “Download” a SYSdev program to the processor, the
program must be “Online”. If “Online” mode cannot be achieved,
program download will not be executed. If the program is currently
“Offline”, the user will be prompted to first go “Online”.
HSL-WISVCUP User’s Manual
SYSTEMS Electronics Group
- 40 -