Download MX8 Reference Guide - Southern Graphics & Systems

Wavelink Avalanche Enabler Configuration
Settings
129
The Settings option under the File menu allows the user to access the control
panel to locally configure the Enabler settings. The Enabler control panel is, by
default, password protected. The default password is
system
The password is not case-sensitive.
Scan Config
Note: LXE does not support the Scan Configuration feature on Windows CE
devices. The Scan Config option under the File menu allows the user to
configure Enabler settings using a special barcode that can be created using the
Avalanche Management Console utilities. Refer to the Wavelink Avalanche
Mobility Center User’s Guide for details.
Exit
The Exit option is password protected. The default password is
leave
The password is not case-sensitive.
If changes were made on the Startup/Shutdown tab screen, then after entering the
password, tap OK and the following screen is displayed:
Change the option if desired. Tap the X button to cancel Exit. Tap the OK button
to exit the Avalanche applet.
E-EQ-MX8RG-A
MX8 Reference Guide