Download MX8 Reference Guide - Southern Graphics & Systems

Appendix B Technical Specifications
255
Environmental Specifications
MX8
Feature
Specification
Operating Temperature
14°F to 122°F (-10°C to 50°C)
Storage Temperature
-4°F to 158°F (-20°C to 70°C)
Water and Dust
IP54
Operating Humidity
Up to 90% non-condensing at 104°F (40°C)
Standards
See “MX8 User’s Guide”, Appendix B.
Contamination
Resistant to exposure to skin oil and other lubricants.
Vibration
Based on MIL Std 810D
ESD
8 kV air, 4kV direct contact
AC Wall Adapter
Feature
Specification
Input Power Switch
None
Power "ON" Indicator
None
Input Fusing
Current Fuse
Input Voltage
100VAC min – 240 VAC max
Input Frequency
50 - 60 Hz
Input Connector
North American wall plug, no ground
Output Connector
AC wall adapter has a 5.5mm barrel connector. This connects to the
LXE cables which transition power to the 20 pin D connector.
Output Voltage
+5V, regulated
Output Current
0 Amps min, 3 Amps max
Operating Temperature
32 F to 100° F / -0° C to 40° C
The LXE-approved AC Power Adapter is only intended for use in a
25°C (77°F) maximum ambient temperature environment.
Storage Temperature
-40° F to 180° F / -40° C to 80° C
(fahrenheit degrees (temperature) = ((centigrade temperature)*9/5)+32)
Humidity
E-EQ-MX8RG-A
Operates in a relative humidity of 5 – 95% (non-condensing)
MX8 Reference Guide