1
Download 4 - D3E Electronique
Transcript
Start Continuous Measurements This command starts continuous measurements. If Ethernet output is not set, only continuous measurement is performed. If Ethernet output is set, continuous measurement is performed and the results corresponding to the number of measurements made are returned as response data. <Command Format> M E A S U R E / C CR Delimiter or M / C CR Delimiter <Response Format> When the Command Is Processed Normally O K CR Measurement result CR Measurement result CR Measurement result CR Data returned for the number of continuous measurements made. Delimiter When the Command Is Not Processed Normally E R CR Delimiter <Parameter Descriptions> Measurement result The measurement results corresponding to the number of measurements made are output when Ethernet output is set. The measurement result is not output when Ethernet output is not set. Reference: Setting the Data to Output via Ethernet (p. 144) 152 Outputting/Controlling with Ethernet FQ User’s Manual D3E Electronique Parc du Grand TROYES 3 Rond Point Winston CHURCHILL 10302 SAINTE SAVINE Tél: 03 25 71 31 50 Fax: 03 25 74 38 82 Email: [email protected] WWW.d3e.fr
