Download 4 - D3E Electronique

Measurement Data That Can Be Used for External Outputs and Calculations
The following values can be used as measurement data and output to external devices via the Ethernet or used
in calculations.
Expression text string
Data name
Description
Data range
JG
Judgement
This is the judgement result.
−2: No judgement (not measured),
0: Judgement is OK,
−1: Judgement is NG,
−13: Teaching not performed error,
−14: Figure not registered error,
−15: Out of range error
AR
R average
This is the average value of the R
(red) component.
0 to 255
AG
G average
This is the average value of the G
(green) component.
0 to 255
AB
B average
This is the average value of the B
(blue) component.
0 to 255
AD
Color difference
This is the difference between the
average color and reference color
within the region.
0 to 442
DV
Color deviation
This is the color deviation within the
region.
0 to 221
4-9 Calculations and Judgements Using Inspection Item Data: p. 75
Measurement Data That Can Be Logged (Color Data)
The following values can be logged as measurement data.
Measured item
Range of value
Description
Color Dif.
0 to 442
This is the difference between the color that was registered
as the reference and the measured color. The average color
within the measurement area is used in both cases.
7-4 Logging Measurement Data and Image Data: p. 110
Increasing Processing Speed for Color Data
Make the measurement region smaller to reduce the processing time.
Changing the measurement region: p. 57
74
Inspecting with Color Data Inspection Item
FQ User’s Manual
D3E Electronique Parc du Grand TROYES 3 Rond Point Winston CHURCHILL 10302 SAINTE SAVINE
Tél: 03 25 71 31 50 Fax: 03 25 74 38 82 Email: [email protected] WWW.d3e.fr