Download IPMIView User`s Guide


Sensors
After selecting multiple servers and clicking the <Sensors> tab, you will see the window as shown in
Figure 13-7. Click the <Query> button for IPMIView to collect the sensor readings from the selected
servers. The information listed in the table shows the sensor status of the selected servers. The window
here shows the chassis status and power supply status. If the chassis is opened or a power supply has
failed, the reading will be in red.
Figure 13-7

Event log
After selecting multiple servers and clicking the <Event Log> tab, you will see a display as shown in
Figure 13-8. Click the <Query> button for IPMIView to collect the event logs from the selected servers.
The table below displays the event log of the selected servers. Select the <Host combo> box to filter the
event log data in the table.
Figure 13-8
50