Download IPMIView User`s Guide

Chapter 2
Installing the IPMIView Utility
A. Installing the IPMIView Utility into a Windows System
To install the IPMIView utility into a Windows system, follow the instructions listed below:
1) Download the IPMIView utility from ftp://ftp.supermicro.com/utility/IPMIView/.
2) Click the folder marked “Windows” to open it.
3) Double click the file: IPMIView20-Win32_vX.X.XX_BuildXXXXXX.exe.
4) When the “Opening IPMIView20-Win32” screen displays, click “Save File” to save the utility into your
system as shown in the screen below.
Figure 2-1
5) When the Downloads screen displays, select the file: IPMIView20-Win32_vX.X.XX_BuildXXXXXX.exe.
4