Download 3ware® SATA+SAS RAID Controller Card CLI Guide, Version 10.0

About this CLI Guide
3ware SATA+SAS RAID Controller Card CLI Guide, Version 10.0 provides
instructions for configuring and maintaining your 3ware® controller using
3ware’s command line interface (CLI).
This guide assumes that you have already installed your 3ware RAID
controller in your system. If you have not yet done so, see the installation
guide that came with your 3ware RAID controller for instructions. This guide
is available in PDF format on your 3ware CD, or can be downloaded from the
LSI® website at http://www.lsi.com/channel/ChannelDownloads.
Table 1: Sections in this CLI Guide
Chapter
Description
1. Introduction to 3ware
Command Line Interface
Installation, features, concepts
2. CLI Syntax Reference
Describes individual commands using the
primary syntax
There are often multiple ways to accomplish the same configuration and
maintenance tasks for your 3ware controller. While this manual includes
instructions for performing tasks using the command line interface, you can
also use the following applications:
•
3ware BIOS Manager
•
3DM®2 (3ware Disk Manager)
For details, see the user guide or the 3ware HTML Bookshelf.
viii
www.lsi.com/channel/products