Download ACS800 Programming Manual
Transcript
253 Index Name 03.17 FAULT WORD 5 Short name FAULT W5 03.18 ALARM WORD 5 ALARM W5 03.19 INT INIT FAULT INT INIT 03.20 LATEST FAULT LAST FLT 03.21 2.LATEST FAULT 2.FAULT 03.22 3.LATEST FAULT 3.FAULT 03.23 4.LATEST FAULT 4.FAULT 03.24 5.LATEST FAULT 5.FAULT 03.25 LATEST WARNING LAST WRN 03.26 2.LATEST WARNING 2.WARN 03.27 3.LATEST WARNING 3.WARN 03.28 4.LATEST WARNING 4.WARN 03.29 5.LATEST WARNING 5.WARN 03.30 LIMIT WORD INV LIMIT WO 03.31 ALARM WORD 6 ALARM W6 03.32 EXT IO STATUS E IO ST 3.33 FAULT WORD 6 FAULT W6 04 ACTUAL SIGNALS 04.01 FAULTED INT INFO FLTD INT 04.02 INT SC INFO INT SC 09 09.01 09.02 09.03 09.04 09.05 09.06 AI1 SCAL AI2 SCAL AI3 SCAL AI5 SCAL AI6 SCAL DS MCW ACTUAL SIGNALS AI1 SCALED AI2 SCALED AI3 SCALED AI5 SCALED AI6 SCALED DS MCW FbEq Unit - - Range 0...65535 (Decimal) 0...65535 (Decimal) 0...65535 (Decimal) 0...65535 (Decimal) 0...65535 (Decimal) 0...65535 (Decimal) 0...65535 (Decimal) 0...65535 (Decimal) 0...65535 (Decimal) 0...65535 (Decimal) 0...65535 (Decimal) 0...65535 (Decimal) 0...65535 (Decimal) 0...65535 (Decimal) 0...65535 (Decimal) 0…65535 (Decimal) 0…65535 (Decimal) PB 92 93 94 95 96 97 98 99 100 - 0...65535 (Decimal) 0...65535 (Decimal) 20000 = 10 V 20000 = 20 mA 20000 = 20 mA 20000 = 20 mA 20000 = 20 mA 0...65535 (Decimal) 0…20000 0…20000 0…20000 0…20000 0…20000 0...65535 (Decimal) 09.07 MASTER REF1 M REF1 -32768…32767 -32768…32767 09.08 MASTER REF2 M REF2 -32768…32767 -32768…32767 09.09 AUX DS VAL1 AUX DSV1 -32768…32767 -32768…32767 09.10 AUX DS VAL2 AUX DSV2 -32768…32767 -32768…32767 09.11 AUX DS VAL3 AUX DSV3 -32768…32767 -32768…32767 09.12 LCU ACT SIGNAL1 LCU ACT1 1=1 09.13 LCU ACT SIGNAL2 LCU ACT2 1=1 1) Percent of motor max. speed / nominal torque / max. process reference (depending on the ACS800 macro selected). 2) The contents of these data words are detailed in chapter Fieldbus control. For the contents of Actual Signal 3.11, see the Master/Follower Application Guide [3AFE64590430 (English)]. Additional data: actual signals and parameters