Download SEC3500_EU - Support

Advanced programmings and registrations
Programming auto operation of <Arrangement>
By using allocated <Arrangement> key, programmed operations are performed
automatically just by pressing <Arrangement> key. The following explains to set
the automatic operations.
Step
Operation
1 Turn the Mode switch to PGM position and select [System
>▪▪▪▪▪>F
2Enter 3 and press o key to set the register in the
3o
Setting] then press F key.
programming mode.
3 Enter 4- digit record number followed by 38. The “38” is the
identification code for arrangement programming. If you
enter “0000”, the register serches a vacant record number.
Then press o key.
4 Press <Arrangement> key.
5 Input 6-digit arrangement arrangement number and press
F key.
6 Input keys you wish to program automatic operations and
press <Arrangement> key.
7 Press <Arrangement> and o keys to complete the
program.
E-110
000038o
This example is for searching a vacant arrangement program number.
<Arrangement>
BBBBBBF
(Arrangement no.)
12x50!F
For programming to register a dozen of •0.50
dept. 01 item.
<Arrangement>o