Download User Manual

User Manual for EG_U110 PC Station
Update: 2013-9-10
After successfully installation, play some MV, when the audio of U110 goes OK, the station will auto
power on and off when the HOST turn of and off. Also pls don’t remove the USB cable on terminal stations or
change the station to another USB port on the HOST, because the USB port is marked for related device only,
after changing to a new USB port, you should set up once more to make the station work fine.
Hardware installation:
1. First secure the bracket to the backside of LCD monitor, using the screws in the screw-bag, see picture
below:
2. Put the station box to the bracket, sliding it down will be ok, no need other screws.
3. Connect VGA cable, USB mouse and keyboard onto the station, then you will see final picture as below:
www.pcstationcn.com www.eglobaltech.cn [email protected] Skype: Kelly-xye
Tel: 0086 755 2835 1606
Add: F17B 6Floor, NanLing WenCheng Commercial Plaza, Nanwan Street, Longgang District, Shenzhen, 518114 China