Download User Manual - Ozsay Satellite Communications

For instance, if the machine name of the PC with the cable to the satellite transceiver is "pc1" and
SkyFile resides on its local drive C:, other workstations can access SkyFile Mail by simply using
\\pc1\c\skyfile\autosync.exe as a desktop link. Alternatively, if workstations are using mapped
drives like N: pointing to \\pc1\c, they can access SkyFile Mail using N:\skyfile\autosync.exe.
Typically each workstation uses its own sub-account name and thus has its own email address. It is
also possible, however, to access a specific mail account from different PCs alternatively, though
this should not be done at the same time.
To ensure that the mail list and the archive tree are automatically synchronized between all
workstations with the internal firewall of Windows XP enabled, "File and printer sharing" must be
allowed in the firewall for local LAN addresses even if the sharing service is not really activated.
If SkyFile Mail has been configured for an automatic dial-in with a specified timing or for using subaccounts, then the transfer module is started automatically on the PC connected to the satellite
terminal. This ensures that internal emails from one sub-account to another are delivered
immediately without having to go through the satellite link.
How can I send an SMS message to a SkyFile Mail user?
You can send SMS messages to SkyFile Mail users only after you have received one from the
SkyFile gateway, so you can see the GSM number of the gateway. All SkyFile Mail users have the
same GSM gateway number. There are two ways to send an SMS message:
You answer the SMS message, using the same cellphone number as in the message you have
received. The SkyFile gateway has kept in memory your mobile number and routes your answer to
the user who had sent you a message before. No additional addressing is required. However,
please do not use a colon ":" after the first word of your message in order to avoid any
misinterpretation of this word as an address.
You want to send an SMS to a SkyFile Mail address from a different mobile phone or from a webbased SMS service? You will have to write the recipient's user name and a colon at the beginning of
your message. Example: ANDREA1: Hello, thanks for your message...
Upper or lower case is not relevant in the username.
Please note that the successful delivery of your message to the satellite gateway depends on
whether your local GSM provider has a bi-directional interworking agreement with T-Mobile or not.
How does black and white list work?
“Black” entries: define terrestrial email addresses or even email domains, which
are not permitted to send messages to your terminal(s).
“White” entries: define terrestrial email addresses or even email domains, which
are allowed to send messages to the terminal(s). Once a “white” entry exists, all
other unspecified email addresses are automatically “black”, that means, only the
"white" list entries are permitted to send emails to the respective SkyFile Mail
account(s).
We have two kinds of black & white lists: The new prepaid function and the existing black & white
list for postpaid accounts. Both lists are implemented in the same way:
1. List with only '-' entries: all non matching addresses are allowed:
-hotmail.com
-yahoo.com
2. List with only '+' entries: all non matching addresses are forbidden:
+company1.com
+company2.com
3. Mixed lists: all non matching addresses are allowed!
[email protected]
-hotmail.com
[email protected]
-yahoo.com
With these rules it is possible for you to exclude all unknown addresses from a spammed domain,
but you are able to receive emails from your friend.
SkyFile Mail v7.60 – User Manual – Full Version – 7-July-10
Page 67 of 68