Download OM-20000089 Europak3.book

Chapter 6
Data Logs
Table 55: Reject Code Values
ASCII
132
Binary
Description
GOOD
0
Observations are good
BADHEALTH
1
Bad satellite health is indicated by ephemeris data
OLDEPHEMERIS
2
Old ephemeris due to date not being updated
during the last 3 hours
ECCENTRICANOMALY
3
Eccentric anomaly error during computation of
the satellite’s position
TRUEANOMALY
4
True anomaly error during computation of the
satellite’s position
SATCOORDINATEERROR
5
Satellite coordinate error during computation of
the satellite’s position
ELEVATIONERROR
6
Elevation error due to the satellite being below the
cut-off angle
MISCLOSURE
7
Misclosure too large due to excessive gap between
estimated and actual positions
NOEPHEMERIS
9
Ephemeris data for this satellite has not yet been
received
INVALIDIODE
10
Invalid IODE (Issue Of Data Ephemeris) due to
mismatch between differential stations
LOWPOWER
12
Low power meaning that the satellite is rejected
due to low carrier/noise ratio
OBSL2
13
L2 measurements are not being used by the filter
NOIONOCORR
16
No compatible ionospheric correction is available
for this particular satellite
BAD_INTEGRITY
17
Bad integrity indicating a large variation between
the measured range to the satellite and the
theoretical range computed from the ephemeris
N/A
99
No observation (a reject code is not applicable)
Euro-3 and Enclosures User Manual Rev 3