Download NevoSL Quick Start Guide

NevoSL provides fully-customizable control of all of your home theater
devices and digital media content. Its touch-sensitive screen is softwarebased, so you or your installer/integrator can include only those controls
you actually use. For more information on customizing NevoSL, your
installer/integrator may refer to NevoStudio Design Guide.
Unpacking NevoSL
Packaging includes the following components:
Nevo SL Universal
Controller
NevoSL Charging
Cradle
Software CD
AC Power
Adapter; varies
by country
USB Cable
OK
Touchscreen Stylus
Once you unpack Nevo SL:
1. Connect the power adapter to the
charging cradle and plug the adapter
into a wall outlet.
2. Dock NevoSL and begin charging the
battery. If it has not already been
charged, it will take 3-4 hours to
fully charge the battery the first
time.
Recharging NevoSL
Nevo SL includes a Lithium-ion rechargeable battery. NevoSL beeps and the
battery indicator turns red when the battery is are running low. Dock NevoSL
to charge the battery.
To dock Nevo SL, simply set the remote in the charging cradle. When it is
correctly docked, the blue light will appear on the bottom of the remote.
About Battery Life
As with all battery-operated devices, battery life will vary depending on
use. It is a good practice to keep NevoSL in its charging cradle when you
are not using it. Your installer/integrator may refer to the NevoStudio
Design Guide for information on changing power settings or please see the
NevoSL User Manual .