Download Engineering Dervice Manual

Transcript
22
4)
Note
6.2
Connect the junction box with DVR and PTZ camera as below.
When you connect RS-485 cable, be careful for the polarity ((D+Î D+, D- Î D-).
DVR Setting
1)
Go to the menu of [SYSTEM > SYSTEM INFO] to get the window as below.
z
z
z
2)
Assign the SITE ID of DVR
Select the type of KEYBOARD :
- There are two type of keyboard, TBT & HI-SHARP
- Select “TBT” if you use the keyboard same as the photo in this manual.
Select the BAUD RATE of keyboard
- The baud rate set in DVR has to be same as the one set in keyboard.
Make DVR setting as above, and click SAVE button.