Download lnstruction Manual - Amazon Web Services

TESTINSTRUMENT
SAFETY
WARNINGI
An electricalshockcausingl0 milliampsof currentto passthroulh the heartwill stopmosthumanheartbeats.
Voltageas low
as35 volts dc or ac rmsshouldbe considereddangerous
andhazardotrs
sinceit canproduiea fatal cgrrentgndercertainconditions.
Highervoltagesareevenmoredangerous.
Observethe following safetyprecautions:
l. Do not exceedthe following inputratings.Personalinjury or damageto the instrumentmay result.
DC VOLTS
(Range2v-lkv) 1200V (dc + ac$eak) DC VOLTS(Range200mv)750V(dc+acpk)
AC VOLTS
(Range2V-lkv) 1000V rms
AC VOLTS(Range200mv)750Vrms
OHMS
450 V dc or acnns
2 0 0 1 t A * 2A
2 A (fuseprotected)
204
20 A (untused)
COM
Do not float morethan500 volts from earthsround.
2. Remove test leads ffom the instrument and point of measurementbefore replacing fuses or performing any servicing on the
multimeter.
3. Use only shroudedsafetytype test leadslike those supplied.Periodicallyinspectinsulationfor any burns,cuts, or breaks.
Never use test leadswith exposedbarewires or poor insulation.
4. Turn offequipment while making test comections in high-voltaggcircuits. Dischargehigh-voltage capacitorsafter
removing power.
5. For voltageor currentmeaswementsin high voltage equipment,do not touch equipment,meter,or test leadswhile power is
applied.
6. If possible,famlliarizeyourself with the equipmentbeing testedand the location of its high voltagepoints. However,
remember that high voltage may appearat unexpectedpoints in d6fective equipment.
7. Use an insulatedfloor material or floor mat to standon, and an in5ulatedwork benchsurface:make certain such surfacesare
not damp or wet.
(continuedon inside back cover)