Download CAEN RFID API User Manual

Up to the current revision, the API handles four Logical Source (called “Source_0”, “Source_1”, “Source_2”,
“Source_3”) and four Read Points (called “Ant0”, “Ant1”, “Ant2”, “Ant3”) and the default configuration is that each
LogicalSource contains only one different ReadPoint; in the future this could change and the number of Logical Sources
and Read Points could be different depending on the model of the RFID reader.
On readers with a single antenna connector, the only meaningful Logical Source is the “Source_0” one and it contains
the only one available antenna “Ant0”.
Note that after a reader switch off the Logical Sources composition is reset to the default configuration.
6
CAEN RFID API – User Manual