Download Xnee Manual - The GNU

Transcript
Chapter 4: Installation
11
4 Installation
4.1 Installation from source with the congure script
To build and install Xnee do the following: Download the following source les into a
directory (version numbers given here are just examples)
Xnee-1.0.tar.gz
Unzip the source le
gunzip Xnee-1.0.tar.gz
Untar the source le
tar xvf Xnee-1.0.tar
Enter the Xnee directory
cd Xnee-1.0
Generate the makeles
./configure
or if you want to specify which directory to install xnee to
./configure --prefix=<PATH TO INSTALLATION DIR>
Build Xnee
make clean all
Install (as root) if you want libxnee to be installed. If not, skip the following command.
Installation of libxnee is not needed to build cnee and gnee.
make install
4.2 Installation from source with default Makele
To unpack, build and install Xnee from the sourceles do the following:
Download the source les into a directory
Unzip the source le
gunzip Xnee-1.0.tar.gz
Untar the source le
tar xvf Xnee-1.0.tar
Enter the Xnee directory
cd Xnee-1.0
Build Xnee