1
Download VINGTOR talk-back & intercom systems
Transcript
VINGTOR talk-back & intercom systems etb - ctb - pro700 - sp-5 VINGTOR is world renowned for its extensive knowledge in the design, construction, installation and maintenance of integrated marine communication systems. The company, with long-term experience serving the maritime industry, has an impressive portfolio and provides cutting edge solutions to vessels worldwide under the internationally renowned brand name of VINGTOR®. The VINGTOR brand underpin Zenitel Marine's reputation as a supplier of the most flexible, reliable and advanced communication systems available today. MEETING YOUR REGULATORY REQUIREMENTS All Zenitel Marine products are tested according to IEC 60945, IEC 60533 standards, and comply with SOLAS regulations and codes relevant for on-board communication systems. Zenitel Marine delivers systems in accordance with the rules of all major classification societies. FOR ALL YOUR SALES & AFTER SERVICE REQUIREMENTS Zenitel Marine is a specialist provider of spare parts, repairs, maintenance contracts and refit solutions. Responsibility and availability are our guidelines and customer support and service a first priority. etb & etb-100 talk-back system 4 7 etb central units ctb & ctb-100 talk-back SYSTEM 8 11 12 13 Ctb central units voc-200 talk-back system MICROPHONES & ACCESSORIES equipment bridgewing 14 SUBSTATION & ACCESSORIES 14 ex proof EQUIPMENT amplifiers 17 18 PRO700 Intercom System PRO700 STATIONS PRO700 ACCESSORIES SP-5 common line intercom system 19 20 21 23 etb & etb-100 talk-back systems The ETB-5 & ETB-10/ETB-10A is a Command Talk-Back system with 5 or 10 lines while the ETB-100/ETB-100A is a Command Talk-Back & Public Address system with 10 lines. The ETB-100A can also be used as an emergency Public Address system. The system comprises a central unit and a comprehensive range of substations and other field equipment for use indoors, outdoors, and in noisy areas on marine vessels. Physical dimensions of the units are based on the Euro DIN standard and are integrated seamlessly into bridge solutions. FEATURES approvals The ETB systems are tested according Command Talk-Back to IEC 60945, and is type approved by Dimmable call light 5 or 10 line selection DNV, RMRS, CCS & RRR Step volume control All Call Output for extra signal device - all lines Handheld or gooseneck microphone Output for parallel microphone and loudspeaker Handsfree operation with foot switch Console or wall mounting Power: 22-32 VDC Audio input from external system (ETB-10A and ETB-100A) Public Address 100V line power amplifier (ETB-100/ETB-100A) 4 VINGTOR Product Catalog ETB Parallel station STB-6GN MB-30G External Audio To All (ETB-10A) Foot switch ETC-1-TB Foot switch Parallel station STB-6 ETC-1-TB Signal unit STB-6 STB-6GN TALK Central unit ETB-10 TALK Parallel station SB-4 CALL 5 1 2 3 4 6 7 8 9 10 Parallel station SB-4 SB-4 SB-4 MICROPHONE P-66 MICROPHONE VOLUME CALL _ P-66 CALL + VINGTOR ALL DIM SIGN CALL CALL TALK ETB-10 VML-1520 VML-1520 230/115V AC MAIN POWER SUPPLY DC OK STB-1 STB-1 24V DC OUT 24V DC EMERGENCY Substation STB-1 Line 2 Substation STB-1 Line 1 SPS-4 CALL CALL TALK TALK Power failure Indication HAS-1 ETC-STB5 Substation STB-5 Line 7 Signal unit Substation HE-112M Line 4 Substation STB-2 Line 3 STB-5 HE-112M STB-2 CALL CALL CALL CALL CALL VML-1520 Substation STB-5GN Line 8 Substation VH-10M Line 5 STB-5GN Signal unit CALL CALL TALK CALL CD-2 VML-1520 Substation STB-3 Line 9 P-66 STB-2 CALL CALL P-MT7 10m cable STB-3 MICROPHONE CALL CALL 1 10m cable Signal unit Substation VHM-10M Line 6 Substation Line 10 EX loudspeaker EX push button box STB-2 CALL CALL CEAG GHG 411 Ui 690V EEx de IIC T6 IN 16A PTB Nr.Ex-87.B.1009 VINGTOR Product Catalog 5 ETB-100 Parallel station STB-6GN MB-30G External Audio To All (ETB-100A) .. ETC-1-TB Foot-switch Parallel station .. STB-6 ETC-1-TB Signal unit STB-6 STB-6GN TALK Central unit ETB-100A TALK Parallel station SB-4 1 2 3 4 5 6 7 8 9 10 DIM SIGN CALL Parallel station SB-4 SB-4 SB-4 VOLUME MICROPHONE P-66 _ ++- MICROPHONE ALL TALK P-66 CALL CALL CALL CALL VINGTOR ETB-100 VML-1520 VML-1520 100V POWER AMPLIFIER Sub-station STB-1 Line 1 Sub-station STB-1 Line 2 STB-1 STB-1 ON OFF VPA-120 POWER AMPLIFIER CALL CALL TALK TALK SPS-4 230/115V AC MAIN POWER SUPPLY DC ok 24V DC OUT 24V DC EMERGENCY Substation STB-2 Line 3 HE-112M STB-2 Powerfailure Indication Substation HE-112MT Line 4 CALL CALL CALL HAS-1 ETC-STB5 Substation STB-5 Line 8 Signal unit VML-15T STB-5 100V Loudspeaker line Line 5 CALL CALL VML-15T VML-1520 P-MT7 Substation STB-3 Line 9 P-66 100V Loudspeaker line Line 6 STB-3 MICROPHONE CALL CALL 1 10m cable Signal unit Substation line 10 100V Ex-loudspeaker Ex-push button box CEAG GHG 411 Ui 690V EEx de IIC T6 6 VINGTOR Product Catalog IN 16A PTB Nr.Ex-87.B.1009 100V Loudspeaker line Line 7 eTb central Units 3005020 0 2 2 3005020018 eTb-5 ceNTRal paNel mOUNTeD 5 lINes, 24V Dc, 2a eTb-10 ceNTRal, paNel mOUNTeD, 10 lINes , 24V Dc, 2a master station with 5 lines selection all call facility monitor-speaker / microphone connector for gooseneck or handheld microphone Dimmable memory light line buttons with memory light buzzer indication of incoming calls step volume control call signal output for extra signal device all lines 24 VDc power supply master station with 10 lines selection all call facility monitor-speaker / microphone connector for gooseneck or handheld microphone Dimmable memory light line buttons with memory light buzzer indication of incoming calls step volume control call signal output for extra signal device all lines 24 VDc power supply size (WxHxD): 240 x 144 x 130mm Weight: 1.6 kg size (WxHxD): 240 x 144 x 130mm Weight: 1.6 kg additional information: ip-22 additional information: ip-22 3005020019 3005020 0 2 1 3005020020 eTb-100 ceNTRal, paNel mOUNTeD, 10 lINes, 24V Dc, 2a eTb-10a ceNTRal INcl. all-call 10 lINes paNel mOUNTeD, 24V Dc, 2amp eTb-100a ceNTRal,INcl.all call,10 lINes paNel mOUNTeD, 24V Dc 2 amp master station with 10 lines selection 100V line output all call facility monitor-speaker / microphone connector for gooseneck or handheld microphone Dimmable back light buzzer indication of incoming calls step volume control call signal output for extra signal device all lines 24V Dc power supply master station with 10 lines selection all call facility monitor-speaker / microphone connector for gooseneck or handheld microphone Dimmable memory light line buttons with memory light buzzer indication of incoming calls step volume control call signal output for extra signal device all lines 24 VDc power supply audio input from external system master station with 10 lines selection 100V line output all call facility monitor-speaker / microphone connector for gooseneck or handheld microphone Dimmable back light buzzer indication of incoming calls step volume control call signal output for extra signal device all lines 24V Dc power supply audio input from external system size (WxHxD): 240 x 144 x 130mm Weight: 1.8 kg size (WxHxD): 240 x 144 x 130mm Weight: 1.6 kg size (WxHxD): 240 x 144 x 130mm Weight: 1.8 kg additional information: ip-22 additional information: ip-22 additional information: ip-22 VINGTOR proDUct cataloG 7 ctb & ctb-100 talk-back systems The CTB & CTB-100 Talk-Back system is a command communication system based on one operator unit/panel and a wide range of substations for marine environments. The CTB-100 system supports public address using power amplifiers and 100V loudspeakers. The systems is typically used to coordinate activities in a work group – the main stations can hear all conversations. The CTB & CTB-100 systems are based on one central unit, up to 4 main operator panels (the CTB-100 Talk-Back system includes loud-hailing and 100 V power amplifier in addition) and a wide range of substations made for marine environments. Operator panels are nominated as master or sub-master by settings in the CU central unit. 8 The CU central unit contains all electronic parts including the optional output amplifier, as well as terminals for termination of all field equipment. The CTB operator panels have foil protected push buttons. The physical dimensions are based on the Euro DIN standard and are integrated seamlessly into bridge solutions. Both handheld and gooseneck microphones can be used via settings in the CU central unit. FEATURES approvals Operator station with Direct Access Keys 10 or 20 lines direct selection Work group communication facility Extension buttons with memory light and buzzer indication of incoming calls Easy access volume control for operators Dimmable panel background light Easy integration with SPA-V2 for audio output and zone selection Integrated bridge solution with DIN norm for mounting The CTB systems are tested according to IEC 60945, and is type approved by DNV, RMRS, CCS & RRR VINGTOR Product Catalog CTB Operation panel CTB-20W/V01 Line 2 HP-8 Operation panel CTB-20 Line 1 Signal unit CTB-20 1 Signal unit 2 7 8 9 10 12 13 14 15 16 17 18 19 20 ALL B AUX DIM SIGN P-66 P-66 5 4 3 6 11 Operation panel CTB-20W/V01 Line 3 MB-30G ETC-1-TB CTB-20 1 2 3 4 CTB-20 1 7 8 9 10 12 13 14 15 16 17 18 19 20 ALL B AUX DIM SIGN VOLUME VOLUME - + + Signal unit 5 6 11 2 4 3 HP-8 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ALL B AUX DIM SIGN VOLUME TALK - TALK + TALK Foot-switch MB-30G ETC-1-TB Signal unit STB-1 Operation panel CTB-20 Line 4 1 2 4 3 5 6 7 8 9 10 11 12 13 14 15 17 18 19 20 ALL B AUX DIM SIGN STB-1 STB-1 Central unit CU-20 ` CTB-20 16 Sub-station STB-1 Line 7 Sub-station STB-1 Line 6 Sub-station STB-1 Line 5 CALL TALK CALL CALL TALK TALK VOLUME - + TALK SPS-4 POWER SUPPLY DC ok 230/115V AC MAIN 24V DC OUT 24V DC EMERGENCY Sub-station STB-1 Line 9 Sub-station STB-1 Line 8 STB-1 Powerfailure Indication HAS-1 ETC-STB5 CALL STB-1 CALL TALK TALK Substation STB-5 Line 17 Signal unit STB-5 Substation HE-112M Line 10 Substation HE-112M Line 11 HE-112M HE-112M CALL CALL CALL CALL 24V DC Substation STB-5GN Line 18 Substation STB-2 Line 12 ` STB-5GN Signal unit STB-2 Substation STB-2 Line 14 Substation STB-2 Line 13 STB-2 STB-2 CALL CALL CALL TALK VML-1520 CALL 24V DC CALL CALL CALL CALL VML-1520 VML-1520 VML-1520 P-MT7 Substation STB-3 Line 19 P-66 STB-3 MICROPHONE 1 CALL CALL Substation VHM-10M Line 15 Signal unit CD-2 VML-1520 24V DC Substation VH-10M Line 16 CALL 10m cable STB-2 CALL CALL Substation line 20 Ex-loudspeaker Ex-push button box STB-2 CEAG GHG 411 Ui 690V EEx de IIC T6 CALL CALL 10m cable IN 16A PTB Nr.Ex-87.B.1009 VINGTOR Product Catalog 9 CTB-100 Operation panel CTB-20W/V01 Line 2 HP-8 Operation panel CTB-20 Line 1 Signal unit CTB-20 1 Signal unit 2 P-66 P-66 5 4 3 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ALL B AUX DIM SIGN Operation panel CTB-20W/V01 Line 3 MB-30G ETC-1-TB CTB-20 1 2 3 4 CTB-20 1 7 8 9 10 12 13 14 15 16 17 18 19 20 ALL B AUX DIM SIGN VOLUME VOLUME - + + Signal unit 5 6 11 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ALL B AUX DIM SIGN HP-8 VOLUME TALK - TALK + TALK Foot-switch 100V POWER AMPLIFIER MB-30G ETC-1-TB Signal unit Operation panel CTB-20 Line 4 Central unit CU-200 ON OFF CTB-20 VPA-120 1 2 3 5 4 POWER AMPLIFIER 6 7 11 12 16 17 18 19 20 ALL B AUX DIM SIGN 8 13 9 10 14 15 VOLUME - + EMERGENCY PA-BUTTON TALK LIFEBOAT STATION VINGTOR Sub-station STB-1 Line 7 STB-6 STB-6 STB-6 CALL CALL VMT-603 CALL Sub-station STB-1 Line 6 Sub-station STB-1 Line 5 CALL Substation STB-2 Line 10 ` Substation HE-112MT Substation HE-112MT Line 9 Line 8 STB-2 CALL HE-112M CALL VML-15 VML-15T Substation VHM-10MT Line 12 VML-15T CD-2 VML-15T Substation VH-10MT Line 13 CALL CALL CALL CALL CALL HE-112M Substation STB-2 Line 11 STB-2 STB-2 CALL CALL Substation STB-5GN Line 18 ETC-STB5 Substation STB-5 Line 17 Signal unit STB-2 CALL 10m cable STB-5 STB-5GN Signal unit CALL CALL CALL TALK CALL 100V Loudspeaker line Line 14 24V DC 24V DC VML-1520 P-MT7 Substation STB-3 Line 19 P-66 STB-3 MICROPHONE 1 100V Loudspeaker line Line 15 CALL CALL 10m cable Signal unit 24V DC Substation line 20 100V Ex-loudspeaker Ex-push button box CEAG GHG 411 Ui 690V EEx de IIC T6 10 VINGTOR Product Catalog IN 16A PTB Nr.Ex-87.B.1009 100V Loudspeaker line Line 16 CALL HAS-1 Ctb central units 3005020 0 0 1 3005020003 CTB-10 CONTROL UNIT, PANEL MOUNTED, 10 LINES CTB-20 control unit, panel mounted, 20 lines Operator panel CTB-10 with 10 lines selection Operates with CU-10 central unit Single call / Group Call / All Call facility Socket for gooseneck or handheld microphone Dimmable panel background light Extension buttons with on lightPerfect for Building Security and Public Environments Buzzer indication of incoming calls Step volume control Call signal Output for extra signal device all lines Operator panel CTB-20 with 20 lines selection Operates with CU-20 or CU-200 central unit Single call / Group Call / All Call facility Socket for gooseneck or handheld microphone Dimmable panel background light Extension buttons with on lightPerfect for Building Security and Public Environments Buzzer indication of incoming calls Step volume control Call signal Output for extra signal device all lines Size (WxHxD): 240 x 144 x 100 mm Weight: 1.2 kg Size (WxHxD): 240 x 144 x 100 mm Weight: 1.2 kg Additional Information: IP-22 Additional Information: IP-22 3005020002 3005020 0 0 5 3005020008 ctb-10w/v01 CONTROL UNIT W/ HP-8, WALL MOUNTED WT CTB-20W/V01 CONTROL UNIT W/ HP-8, WALL MOUNTED WT CU-10 CENTRAL UNIT FOR CTB-10, 24V DC, 3A, STANDARD Waterproof operator panel with 10 lines selection, With external loudspeaker HP-8 Option, microphone P-66 and P-66/10 Operates with CU-10 or CU-100 central unit Single call / Group Call / All Call facility Dimmable panel background light Line buttons with memory light Buzzer indication of incoming calls Step volume control Call signal Wall mounting Waterproof operator panel with 20 lines selection, With external loudspeaker HP-8 Option, microphone P-66 and P-66/10 Operates with CU-20 or CU-200 central unit Single call / Group Call / All Call facility Dimmable panel background light Line buttons with memory light Buzzer indication of incoming calls Step volume control Call signal Wall mounting Central unit 10 lines for the CTB system Operates with CTB-10 and CTB-10 W/V01 panel units AUX / Alarm input Output to Public Address system 24 VDC power supply Size (WxHxD): 300 x 160 x 156 mm Weight: 1.4 kg Size (WxHxD): 300 x 160 x 156 mm Weight: 1.4 kg Size (WxHxD): 400 x 400 x 120 mm Weight: 2.6 kg Additional Information: IP-66 Additional Information: IP-66 Additional Information: IP-22 VINGTOR Product Catalog 11 3 0 0 5020010 300502000 9 3005020011 CU-20 CENTRAL UNIT FOR CTB-20, 24V DC, 4 A, STANDARD CU-100 CENTRAL UNIT FOR CTB10, 24V DC, 3A, 100V OUTPUT W/ ALARM MUTE CU-200 CENTRAL UNIT FOR CTB20, 24V DC, 4 A,100V OUTP. W/ ALARM MUTE Central unit 10 lines for the CTB-100V system Operates with CTB-10 and CTB-10 W/V01 panel units AUX / Alarm input Output to Public Address system 24 VDC power supply24 VDC power supply 100V line output High power amplification by use of external 100V power amplifier Central unit 20 lines for the CTB-100V system Operates with CTB-20 and CTB-20 W/V01 panel units AUX / Alarm input Output to Public Address system 24 VDC power supply 100V line output High power amplification by use of external 100V power amplifier Central unit 20 lines for the CTB system Operates with CTB-10 and CTB-10 W/V01 panel units AUX / Alarm input Output to Public Address system 24 VDC power supply Size (WxHxD): 400 x 400 x 120 mm Weight: 2.6 kg Size (WxHxD): 400 x 400 x 120 mm Weight: 3.2 kg Size (WxHxD): 400 x 400 x 120 mm Weight: 3.2 kg Additional Information: IP-22 Additional Information: IP-22 Additional Information: IP-22 102017420 0 3006090478 VOC-200 CENTRAL, PANEL MOUNTED 2 LINES 24V DC, 2A MBOKS, metal mox when wall mounted voc-200 talk-back system Simple 2 lines system Not according to IEC 60945 12 VINGTOR Product Catalog Designed for panel mounting in consoles. Wall mounting by use of MBOKS Two extension buttons with light indication of incoming calls Built-in buzzer for incoming calls Call button for activating external signal units in noisy areas. On-wall box designed for stations in Talk-Back systems Size (WxHxD): 238 x 130 x 85mm Weight: 1.0 kg Size (WxHxD): 244 x 138 x 76 mm Weight: 1,0 kg Additional Information: IP-22 Additional Information: IP-22 MICROPHONES & ACCESSORIES 3005020 0 3 3 3005020029 MB-30G GOOSENECK MICROPHONE ETC-1-TB HANDMIC W/5 PIN DIN PLUG Electret microphone, 2K ohm 5-pin din plug For use in Public Address and Talk-Back systems Dynamic, 200 ohm Flexible cord with PTT switch Hang up clip For ETB and CTB central panels Size (Length): 460 mm Weight: 0.1 kg Size (WxHxD): 58 x 102 x 47mm Weight: 0.2 kg Additional Information: IP-22 Additional Information: IP-22 3005020 0 3 9 3005020040 P-66 hand microphone with plug, wt p-66/10 HAND MICROPHONE WITH PLUG AND 10M CABLE, WT Weatherproof, salt water resistant handheld microphone Suitable for heavy-duty outdoor operation subject to noise disturbance Delivered with 2 meter flexible cable and plug For use in Public Address System and Talk-Back Weatherproof, salt water resistant handheld microphone Suitable for heavy-duty outdoor operation subject to noise disturbance Delivered with 10 meter cable and plug For use in Public Address System and Talk-Back Size (WxHxD): 54 x 82 x 55mm Weight: 0.3 kg Size (WxHxD): 54 x 82 x 55mm Weight: 0.6 kg Additional Information: IP-66 Additional Information: IP-66 3005020016 3005020 0 1 3 3005020028 ecm-5 EXTENSION CORD 5 M FOR P-290, P-MT7, P-66 ECM-10 EXTENSION CORD 10 M FOR P-290, P-MT7, P-66 ETC-1-CH CHASSIS CONTADCT 5-PIN DIN FOR ETC-1-TB W/1M CABLE Male and female plug in polyamid material with PG-13.5 cable inlet Male and female plug in polyamid material with PG-13.5 cable inlet Prepared with screw terminals for connections Size PCB (WxHxD) : 50 x 35 x 16mm Weight: 0.1 kg Size (Length): 5m Weight: 0.3 kg Size (Length): 10m Weight: 0.5 kg Additional Information: IP-66 Additional Information: IP-66 3005020065 2990000 0 3 2 3005020055 WBOKS, WALL MOUNTED BOX FOR ETB-5, ETB-10, ETB-100 AND CTB-10/20 CPM-SNT-120-5 Power supply 100-240VAC/24VDC 5A SPS-4 POWER SUPPLY 115/230V AC / 24V DC , 4A W/AUTOSWITCH Switch mode, reglutated power 22.5 to 29.5 V DC (adjustable via potentiometer on front) Overload protected Short-circuit protected DIN mounting GL approved Automatic switch to emergency 24 VDC when mains supply fails. Potential free relay contact for power failure Size (WxHxD): 240 x 144 x 100mm Weight: 0.4 kg Size (WxHxD): 40 x 130 x 125 mm Weight: 0.7 kg Size (WxHxD): 200 x 200 x 150 mm Weight: 4,1 kg Additional Information: IP-22 Additional Information: Din rail mounting Additional Information: P-44 VINGTOR Product Catalog 13 bRIDGeWING eQUIpmeNT 300502005 3 3005020064 sb-4 plUG bOx fOR HaNDmIc, WT sTbOks fOR sTb-6 aND sTb-6GN WHeN Wall mOUNTeD Watertight socket box For microphone (p-66 or p-66/10) or headset (p-mt7) socket with dust cap Wall mounting size (WxHxD): 110 x 80 x 63 mm Weight: 0.3 kg size (WxHxD): 144 x 96 x 47 mm Weight: 0.1 kg additional information: ip-66 additional information: ip-22 300502006 2 3005020063 sTb-6 flUsH mOUNTeD sUbsTaTION sTb-6GN flUsH mOUNTeD fOR mIc sUbsTaTION W/GOOseNeck substation for indoor use parallel microphone / loudspeaker for etb and ctb operator panels Wall mounting with back box socket for handheld microphone etc-1-tb sUbsTaTIONs accessORIes substation with gooseneck microphone for indoor use parallel microphone / loudspeaker for etb and ctb operator panels Flush or bulkhead mounting Wall mounting with back box size (WxHxD): 144 x 96 x 44,5 mm Weight: 0.35 kg size (WxHxD): 144 x 96 x 44,5 mm Weight: 0.85 kg additional information: ip-22 additional information: ip-22 300502005 7 3005020058 sTb-1 Wall mOUNTeD INDOOR lOUDspeakeR WITH call aND aNsWeR bUTTON sTb-2 callbOx WT Wall mOUNTeD talk-back substation, designed for use in cabins, messrooms, etc. call-button privacy talk-button call box Waterproof call button Forming a loud speaking talk-back substation together with a horn loudspeaker (Vml-1520) size (WxHxD): 144 x 96 x 49 mm Weight: 0.35 kg size (WxHxD): 110 x 80 x 63 mm Weight: 0.3 kg additional information: ip-22 additional information:ip-66 300502005 9 sTb-3 cOmbINeD call-plUGbOx-sIGNal Relay (2a) UNIT WITHOUT lOUDspeakeR calling unit Waterproof call-button socket with dust-cap for connection of headset or microphone built-in relay circuit for operation of external signalling devices Forming a loudspeaking talk-back substation together with a horn loudspeaker size (WxHxD): 224 x 80 x 63 mm Weight: 0.5 kg additional information: ip-66 14 VINGTOR proDUct cataloG 3005020050 3005020 0 3 0 3005020032 p-mt7 HEADSET W/BOOM MIC. AND 10M CORD W/4-PIN C-16 PLUG etc-stb5 HAND MICROPHONE WITH 4-PIN DIN PLUG has-1 HANDSET FOR STB-5 Headset for Analog Telephone and Talk-back System Standard with 10 meter cable and plug To be used in noisy areas Includes headset holder Weight: 1.2 kg Dynamic microphone, 200 ohm Flexible cord with PTT switch Hang up clip Size (WxHxD): 58 x 102 x 47mm Weight: 0.2 kg Handset with cradle Designed for use together with Talk-back substation STB-5 Size (WxHxD): 60 x 220 x 80mm Weight: 0.3 kg Additional Information: For STB-5 only. Additional Information: IP-54 3005020061 3005020 0 6 0 3005010206 stb-5gn FLUSH MOUNTED SUBSTATION W/RELAY, W/ GOOSENECK STB-5 FLUSH MOUNTED SUBSTATION W/RELAY, FOR MIC OR HANDSET stboks5 for stb5 and stb-5gn when wall mounted Talk-Back substation, designed for multipurpose indoor use ( engine room ) Delivered for flush or bulkhead mounting Call button Built-in relay circuit for operating of external signalling devices. Loudspeaker Gooseneck microphone Talk-Back substation, designed for multipurpose indoor use ( engine room ) Delivered for flush or bulkhead mounting Call button Built-in relay circuit for operating of external signalling devices. Loudspeaker Socket for handset or handheld microphone Size (WxHxD): 144 x 144 x 59 mm Weight: 0.2 kg Additional Information: IP-22 3006206006 he-112m OUTDOOR LOUDSPEAKER WITH CALL BUTTON Talk-Back Substation, for use in open deck areas Wall mounting Call-button Size (WxHxD): 144 x 144 x 57 mm Weight: 0.9 kg Size (WxHxD): 144 x 144 x 57 mm Weight: 0.5 kg Size (WxHxD): 122 x 120 x 90 mm Weight: 0.4 kg Additional Information: IP-22 Additional Information: IP-22 Additional Information: IP-66 3006206 0 2 9 3006206007 u2410 FOOT SWITCH INDOOR USE he-112m-t LOUDSPEAKER, Wt, 100V Foot switch for VOC, ETB and CTB systems 1-Pole switch 250 VAC 6A Talk-Back Substation, for use in open deck areas Wall mounting Call-button Size (WxHxD): 101 x 198 x 40 mm Weight: 0,2 kg Size (WxHxD): 122 x 120 x 90 mm Weight: 0.6 kg Additional Information: IP-22 Additional Information: IP-66 VINGTOR Product Catalog 15 3 0 0 6206030 300620603 2 1020600989 VH-10m pORTable HORN speakeR WITH callbOx aND 10m cable+plUG WT VH-10m-T pORTable HORN speakeR WITH callbOx aND 10m cable+plUG WT cD-2 plUGbOx WT - Ip-66 talk-back substation, for use in open deck areas call-button also for wall mounting plugbox cD-2 needed For portable unit VH-10m Wall mounting. talk-back substation, for use in open deck areas call-button also for wall mounting plugbox cD-2 needed size (WxHxD): 80 x 110 x 63 mm Weight: 0.35 kg additional information: For VH-10m & VH-10m-t 1020600992 IRR-3 Relay bOx 24V Dc OR 220V ac - sIGNal UNIT WT separate relay unit for operation of 24 VDc or 220 visible and/or audible signal units. Wall mounting size (WxHxD): 156 x 410 x 305 mm Weight: 3.7 kg size (WxHxD): 156 x 410 x 305 mm Weight: 3.7 kg size (WxHxD): 110 x 80 x 63 mm Weight: 0,35 kg additional information: ip-66 additional information: ip-66 additional information: ip-66 3 0 0 6206034 3006100088 VHm-10 specIal Deck UNIT WITH HaNDmIc mOUNTeD IN WT cabINeT Vml-1520 HORN speakeR 15W/20 OHm WT talk-back substation for use in open deck areas Wall mounting call-button Handheld microphone prepared for external loudspeaker General purpose 15 Watt 20 ohm horn loudspeaker For use in deck areas, engine room etc. to be used together with acm or talk-back stations 2,5 mtr. cable size (WxHxD): 215 x 310 x 160 mm Weight: 2.5 kg size (WxHxD): 250 x 145 x 270 mm Weight: 1.35 kg additional information: ip-66 additional information: ip-67 optional junction box Jb-15t 3 0 0 6206035 3006100090 VHm-10-T specIal Deck UNIT WITH HaNDmIc mOUNTeD IN WT cabINeT Vml-15T/f HORN lOUDspeakeR 15W 100V W/fUse, 2 mTR.cable talk-back substation for use in open deck areas Wall mounting call-button Handheld microphone p-66 prepared for external loudspeaker General purpose 15 Watt horn loudspeaker For use in deck areas, engine room etc. With 100V line transformer adjustable power tapping With Fuse size (WxHxD): 215 x 310 x 160 mm Weight: 2.5 kg size (WxHxD): 250 x 145 x 298 mm Weight: 1.9 kg additional information: ip-66 additional information: ip-67 optional junction box Jb-15t 16 VINGTOR proDUct cataloG ex proof EQUIPMENT 3006206 0 1 5 nebb-42ex CALLBOX EX GHG 411 ATEX APPR. M/IMPULSKNAPP and 2 NIPLE Explosion proof calling box for hazardous areas Delivered for bulkhead mounting Call-button for calling Master unit To be used together with EX horn speaker DSP-15EExeNT or DSP-15EExeN Size (WxHxD): 85 x 85 x 78 mm Weight: 0.35 kg Additional Information: IP-67 3006100 0 3 8 3006100039 DSP-15EExeN EX speaker 20 ohm 15W w/2 cab inlets, Atex approved WT DSP-15EExeNT EX speaker 15W with two cables inlets ATEX approved WT Rated / max. power 15w / 15w Material: antistatic PA / Black Bracket and all outside nuts and screws in stainless steel With 100V line transformer Rated / max. power 15w / 15w Tappings; 2W - 4W - 7,5W and 15W Material: anitistatic PA / Black Bracket and all outside nuts and screws in stainless steel Size (WxHxD): 106 x 144 x 207 mm Weight: 2.2 kg Size (WxHxD): 106 x 144 x 207 mm Weight: 2.2 kg Additional Information: IP-67 Additional Information: IP-67 VINGTOR Product Catalog 17 amplIfIeRs 300501023 5 Vpa-120 pOWeR amplIfIeR, 120W power amplifier in a 19” rack cabinet 100 V and 8 ohm output Dual inputs with priority switching temperature controlled, forced back-to-front ventilation 115/230 Vac mains and 24 VDc battery backup power consumption at 0db 24V Dc 7,5 a power consumption at 0db 230V ac 1.7 a pilot tone line monitoring 24 VDc / 800 ma power output for external equipment chime signal with on/off switch size (WxHxD): 482 x 133 x 420 mm Weight: 18.2 kg additional information: tested according to iec 60945, iacs e10, iec 60533 300501023 7 Vpa-240 pOWeR amplIfIeR, 240W power amplifier in a 19” rack cabinet 100 V and 8 ohm output Dual inputs with priority switching temperature controlled, forced back-to-front ventilation 115/230 Vac mains and 24 VDc battery backup power consumption at 0db 24V Dc 15,4 a power consumption at 0db 230V ac 3.1 a pilot tone line monitoring 24 VDc / 800 ma power output for external equipment chime signal with on/off switch size (WxHxD): 482 x 133 x 420 mm Weight: 21.2 kg additional information: tested according to iec 60945, iacs e10, iec 60533 3006206019 300501023 9 Rs-3c Rack 3HU, TeRmINals f/230Vac/24VDc IN/OUT Vpa-400 pOWeR amplIfIeR, 400W 19”, 3U cabinet prepared for amplifier prepared with necessary terminals for signal in/out and power supply power amplifier in a 19” rack cabinet 100 V and 8 ohm output Dual inputs with priority switching temperature controlled, forced back-to-front ventilation 115/230 Vac mains and 24 VDc battery backup power consumption at 0db 24V Dc 28,0 a power consumption at 0db 230V ac 5.4 a pilot tone line monitoring 24 VDc / 800 ma power output for external equipment chime signal with on/off switch size (WxHxD): 520 x 450 x 180mm Weight: 6.0 kg size (WxHxD): 482 x 133 x 420 mm Weight: 24.2 kg additional information: additional information: tested according to iec 60945, iacs e10, iec 60533 maNUals & spaRes a1 0 0K11162 a 100K 1086 4 3005020024 etb-5-10-100 installation & operation Manual ctb-100 installation & user Manual standard set of spares for etb-5/10/100 a1 0 0K11163 a 100K 1087 1 3005020024 etb-5-10-100 user guide voc-200 installation & user Manual standard set of spares For ctb-10/20 and cu-10/20/100/200 a1 0 0K10865 ctb installation & user Manual 18 VINGTOR proDUct cataloG PRO700 Intercom System exchangeless intercom The Pro700 system is a cost effective and userfriendly communication system for ships. The system does not use a central exchange. All stations are individually programmable and powered from a central power supply. The system supports upto 40 stations (16-20 recommended) and one speech channel. The system provides an extensive range of standard and optional features supporting both low and handsfree loud-speaking conversations.The system has a wide range of robust and weather resistant stations and signal units for all on-board environments. CABLE SPECIFICATION 0.6 mm diameter 120 nF/km (standard cable quality) Max. cable run: 700m Max. distance from power supply: 500m BRIDGE WINGS AA703P FEATURES Max. capacity of 40 stations, recommended system size is 20 stations Standard power supply, 24-27V DC, 4A No system exchange Priorities Cabin stations with privacy and display All Call and two Group Calls with auto answer-back One program distribution channel Simple installation, loop cabling Hands-free conversation, semi duplex Remote control of external audible or visible signal devices Interface possibilities to Public Address and PABX (only one preprogrammed number) Amplifier (10W) to be built into stations Note! Not according to IEC 60945 W/H CONSOLE ACCOMMODATION AA704+PRO221 CD-4 AA702 DECK AREAS AA703+PRO211 AA711 ENGINE CONTROL ROOM AA702 + BF636 AA704 IRR-24 AA703V VML-1520 ENGINE ROOM (NOISY AREAS) MP-9320 230 VAC / 24 VDC PRO-36-PELP EHS-24 AA703V CD-7 VML-1520 Ext. power 24VDC VINGTOR Product Catalog 19 pRO700 stations 300760005 2 3007600049 aa711 Desk/Wall masTeR sTaTION aa704 cONsOle masTeR sTaTION WITH keybOaRD WITH IllUmINaTeD DIGITs loudspeaking hands free built-in microphone and loudspeaker Full keyboard. moving rubber keys soft speaking/confidential. lift up as a telephone handset easily programmable via internal switches built-in relay for control of camera, door lock, etc. Hang on the wall by using the wall bracket GF732 cabinet is cast in high-grade, impact resistant abs plastic external 20 ohms loudspeaker can be connected built-in loudspeaker and microphone, folio keyboard is in UV cured pVc with adjustable backlight For console flush mounting or surface wall mounted easily programmable via internal switches external 20 ohms loudspeaker can be installed an optional 10 watts amplifier Fc740 for external loudspeaker can be plugged in from the backside size (WxHxD): 68 x 225 x 45 mm Weight: 0.3 kg size (WxHxD): 125 x 280 x 50mm Weight: 0.5 kg additional information: ip-22 3007600034 bF642 cord, 3007600034 kb-171 socket additional information: ip-22 3 0 0 7600051 300760004 7 3006220015 aa706 cleaN ROOm sTaTION flUsH mOUNTeD 18-27V Dc aa702 Wall masTeR sTaTION WITH DIsplay aa703V INDUsTRIal masTeR sTaTION built-in loudspeaker and microphone For flush or wall mounting Flat chemical resistant and anti-bacterial front surface for easy cleaning Full keyboard, folio type built-in relay for control of camera, door-lock etc. loud speaking hands free built-in loudspeaker and microphone surface mounted on the wall Full keyboard, moving rubber keys can be flush mounted by use of the clip-on frame bF636 easily programmable via internal switches cabinet is cast in high-grade, impact resistant abs plastic external 20 ohms loudspeaker can be connected loud speaking hands free built-in loudspeaker and microphone surface mounted on the wall Full keyboard. Folio type splash proof for dirty in/outside conditions cabinet is made of a flame retardant and chipresistant casing of durable bayblend plastic easily programmable via internal switches built-in relay for control of camera, door lock, etc external 20 ohms loudspeaker can be installed an optional 10 watts amplifier 3007600026 for external loudspeaker can be plugged in, inside the station cabinet size (WxHxD): 125 x 280 x 50 mm Weight: 0.9 kg size (WxHxD): 80 x 220 x 51 mm Weight: 0.4 kg size (WxHxD): 124 x 244 x 63 mm Weight: 0.8 kg additional information: ip-65 (front access) additional information: ip-44 additional information: ip-64 20 VINGTOR proDUct cataloG 3006220014 3007600 0 1 3 aa703p maIN sTaTION,pORTable W/ bUIlT-IN lOUDsp. 18-27V Dc bc735 mUlTIpURpOse UNIT the aa703p is a a splash proof station with 5 m. cable and plug, designed for humid, dirty and outdoor conditions Horn speaker Vml 1520 can be connected to station the front can be removed to allow easy access during installation and service the station has an internal 3 W amplifier and the speaker volume is adjustable to four levels with switches located inside the station the aa703p offers a remote control output via a built-in relay, which can be used to drive external call indicators (lamp/buzzer) or for general remote control facility activated by the calling subscriber external loudspeaker, microphone or handset must be connected no keyboard splash proof for dirty in/outside conditions cabinet is made of a flame retardant and chipresistant casing of durable bayblend plastic easily programmable via internal switches built-in relay for control of camera, door lock external 20 ohms loudspeaker must be installed size (WxHxD): 124 x 244 x 63 mm Weight: 1,45 kg size (WxHxD): 124 x 244 x 63 mm Weight: 0.8 kg additional information: ip-65 1020159000 cD-4 plug box additional information: ip-65 pRO700 accessories 3007600 0 2 9 Gf732 Wall bRackeT fOR aa711 For wall mounting maNUals & spaRes a100K10226 Pro-700 technical Manual a100K10227 Pro-700 user instruction 3006220011 Pro700s standard set of spares 3007600020 bf642 cORD, 2m spIRal, 8 WIRe, RJ45 size (WxHxD): 60 x 100 x 40 mm Weight: 0.02 kg size (WxHxD): N/a 3007600 0 1 7 3007600034 bf636 fRONT plaTe fOR flUsH mOUNTING kb-171 sOckeT, 8 pIN mODUlaR Jack, sURface mOUNT swap on abs plastic connection box with 8 pin rJ45 size (WxHxD): 140 x 280 x 4.5 mm Weight: 0.1 kg size (WxHxD): 51 x 51 x 22.5 mm Weight: 0.040 kg additional information: For aa702 additional information: For desk/wall station VINGTOR proDUct cataloG 21 3 0 0 6220006 300622000 7 1020159000 pro211 Handset, wall mount pro221 Handset, flush mount CD-4 Plugbox water tight The handset unit PRO211 is designed to be used together with main station AA703 The built-in loudspeaker in AA703 is disconnected when lifting the handset Size (WxHxD): 80 x 240 x 63 mm Weight: 0.9 kg Used together with main station AA704 for flush mounting in consoles The built-in loudspeaker in AA704 is disconnected when lifting the handset For portable unit Wall mounting Size (WxHxD): 80 x 280 x 125 mm Weight: 0.65 kg Size (WxHxD): 80 x 110 x 63 mm Weight: 0,35 kg Additional Information: IP-44 Additional Information: IP-66 1 0 2 0600988 300622000 9 3006220008 CD-7 Plugbox wt for pr0-36pelp pro-36-pelp Headset w 10m cable and plug pro-36-pel Headset w 10m cable Additional Information: IP-44 Used together with 3006220009, portable headset Socket with dustcap Headset with ON/OFF button Delivered for bulkhead mounting Is suitable for installation in noisy areas Headset for connection to Plug Box CD-7 Includes switchbox with ON/ OFF and Talk push-button w/ belt clip Standard with 10 meter cable and plug 4 pin Amphenol To be used in noisy areas Includes switchbox with ON/OFF and Talk pushbutton w/ belt clip Standard with 10 meter cable To be used in noisy areas Size (WxHxD): 80 x 110 x 63 mm Weight: 0.4 kg Weight 1.2 kg Weight 1.1 kg Additional Information: IP-66 Additional Information: IP-54 Additional Information: IP-54 3 0 0 6202045 300620601 3 3007600026 IRR-24 RELAYBOX FOR 24V DC SIGNAL UNITS WT mp-9320 POWER SUPPLY 220V AC / 24V DC - 3A FC740 10 watt internal amplifier Module Built-in timer circuit. 20 sec. signalling time as standard Alarm stop button Delivered for bulkhead mounting Suitable for installation in noisy areas Fixed output voltage Short circuit proof Mains cord with euro-plug LED on front Size (WxHxD): 80 x 110 x 63 mm Weight: 0,35 kg Size (WxHxD): 86 x 50 x 130mm Weight: 0.47 kg Additional Information: IP-66 Additional Information: FC740 is easily mounted on top of the PCB inside the stations. FC740 can be used as a talk-back unit (common loudspeaker and microphone), or as a plain 10W amplifier Size (WxHxD): 95 x 28 x 89 mm Weight: 0.1 kg Additional Information: For stations AA703V/P, BC735 3 0 0 6206010 3006100088 mp-8861 CONVERTER 24/24V DC - 3A VML-1520 Horn speaker 15W/20 OHM WT Switch mode DC/DC converter Protected against reversed polarity and over voltage (input) Thermal protection, short circuit proof and over voltage protection (output) Input and output are electrically separated from chassis. The input is electrically separated from the output 6.3 mm push-on terminals (input and output) Size (WxHxD): 119 x 135 x 46 mm Weight: 0.6 kg Additional Information: Additional Information: Needed when connected to ship's 24V DC 22 VINGTOR Product Catalog General purpose 15 Watt 20 ohm horn loudspeaker For use in deck areas, engine room etc. To be used together with ACM or talk-back stations Size (WxHxD): 250 x 145 x 270 mm Weight: 1.35 kg Additional Information: IP-67 Optional junction box JB-15T 3006206027 sp-5 common line intercom system sysTem DescRIpTION the sp-5 common line intercom system provides all-to-all communication between a specified number of microphone stations without priority. any station pressing the talk button and speaking via the microphone will be heard in all other loudspeakers (its own loudspeaker is disconnected). the amplifier rack is for installation indoors while the microphone stations and loudspeakers are weatherproof and rugged for outdoor use. amplifiers with 120W, 240W, and 400W power output are available sp-5mT WaTeRTIGHT mIcROpHONe sTaTION Wall mOUNTeD microphone station 100V balanced output. 24V Dc power supply For use together with microphone type H66-sp5 and Vpa amplifier note ! not according to iec 60945 size (WxHxD):224 x 124 x 63 mm Weight: 0.9 kg additional information: ip-65 3006206026 3006206 0 0 3 3006206025 sp-5HT WaTeRTIGHT HeaDseT sTaTION Wall mOUNTeD H66-sp5 HaND mIc/pTT aND flexIcable+plUG fOR abOVe sp5-36-pelp HeaDseT W/ bOOm mIc/pTT aND plUG fOR abOVe Headset station 100V balanced output. 24V Dc power supply For use together with headset sp5-36-pelp and Vpa amplifier Weatherproof, salt water resistant handheld microphone-loudspeaker unit suitable for heavy-duty outdoor operation subject to noise disturbance Delivered with 2 meter flexicable and plug for sp-5mt Headset for connection to a sp-5Ht includes talk switchbox w/ belt clip standard with 10 meter cable and plug to be used in noisy areas size (WxHxD): 54 x 82 x 55mm Weight: 0.3 kg Weight: 1.2 kg additional information: ip-66 additional information: ip-54 3006100 0 9 0 3006206019 Vml-15T/f HORN lOUDspeakeR 15W 100V W/fUse, 2 mTR.cable Rs-3c Rack 3HU, TeRmINals f/230Vac/24VDc IN/OUT General purpose 15 Watt horn loudspeaker For use in deck areas, engine room etc. With 100V line transformer adjustable power tapping With Fuse size (WxHxD):224 x 124 x 63 mm Weight: 0.9 kg size (WxHxD): 250 x 145 x 298 mm Weight: 1.9 kg additional information: ip-65 additional information: ip-67 optional junction box Jb-15t 19”, 3U cabinet prepared for amplifier prepared with necessary terminals for signal in/out and power supply size (WxHxD): 520 x 450 x 180mm Weight: 6.0 kg additional information: see page 18 for amplifiers Vpa-120, Vpa-240 and Vpa-400 VINGTOR proDUct cataloG 23 www.vingtor.com VINGTOR PRODUCT CATALOGS BaTTeRyless TelephONe sysTems a100k11295 Talk-back & INTERCOM SYSTEM SYSTEMSA100K11296 SPA -V2 PUBLIC ADDRESS SYSTEMA100K11298 ACM FAMILY & PULSE SYSTEMSA100K11297 WIRELESS SOLUTIONSA100K11299 RADIO SOLUTIONSA100K11318 MASTER CLOCK, SOUND RECEPTION, HOSPITAL & REFRIGERATOR SYSTEMSA100K11300 ENTERTAINMENT SYSTEMSA100K11302 CCTV SYSTEMSA100K11303 COMMON EQUIPMENTA100K11301 DOC NO A100K11296 31.10.2012 Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. STENTOFON and VINGTOR products are developed and marketed by Zenitel. The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice. ZENITEL PROPRIETARY. This document and its supplementing elements, contain Zenitel or third party information which is proprietary and confidential. Any disclosure, copying, distribution or use is prohibited, if not otherwise explicitly agreed in writing with Zenitel. Any authorized reproduction, in part or in whole, must include this legend. Zenitel – All rights reserved.
