Download Smart Network Building Blocks

MTS Series Carrier Ethernet Switch
OAM Capability
- 802.3ah
Remote failure indication, Self discovery
Dying Gasp
Link Fault, Critcal Event
Remote Loopback
Delay/delay variation
Frame loss test
User data packets loopback, User enable/disable loopback
Performance monitoring
Errored Symbols Seconds, Errored Frames Summary
- IEEE 802.1ag (CFM)
Path discovery, Fault detection
Link trace Message and Reply (LTM, LTR)
Continuity Check Messages (CCM)
Fault verification and isolation
Loopback Message and Reply (LBM, LBR)
Fault notification and recovery
Performance monitoring
Frame Loss Ratio (FLR), Delay (FD) and Delay Variation (FDV)
- ITU Y.1731 AIS/RDI/LCK/TST
Product Specifications
Fiber Optic 10GE Ports (SFP+)
MTS10080-L / MTS10080-H
8 / 20
10000Base Fx
Choose SFP separately
Support Bi-Directional SFP
Port Density
Data Rate
Wavelength or Distance
Single Fiber Solution
Fiber Optic 10GE Ports (XFP)
Port Density
Data Rate
Wavelength or Distance
Single Fiber Solution
MTS10080-L / MTS10080-H
8/4
10 GbE， with or without OTN
Choose XFP separately (1310, 1550, WDM)
Optional
Ethernet Features
Bandwidth Limitation
Performance Monitoring
DHCP Client Support
VLAN Support
Supported MAC Addresses
Link/Ring Protection
tamper-proof in steps of 1 Mbps per port
Yes
Yes
Port, EVC or Flow based tagging and QinQ.
Policing/Shaping/Scheduling
4096
ERPS per G.8032
Optional Forward Error Correction Features
Link Interface w./ FEC
FEC Coding
Link Interface w/o FEC
11.1 Gbps (G.709 OTU2) with FEC on
G. 975 (RS 255, 239)
10.3 Gbps
Network Management
Ethernet Port
Local Craft
User Interface
Secure Configuration
Telnet/SSH
RS232 (VT100)
SNMPv.2, CLI, GUI
SSHv2 (Secure Shell) terminal
Compliance Status
Automatic Protection Capability
- G.8032: under 50ms for up to 16 nodes
Dual ring, Subtending rings, Multiple rings
CCM OAMPDU failure detection
- Failure detection
Loss of Light/Signal
Loss of Continuity (CCM)
Manually initiated switch-over
- In-service addition of nodes to the ring
Ethernet over WDM Capability
- Optional built-in optical tray for WDM mux/demux or add/drop
- Instantly upgrade link capacity using colored 10G transceivers
- Optional forward error correction for long distance transport
NEBS
EMC
Safety
Level 3 GR-63
GR-1089
UL (# E318639); CE (EMC/EMI)
Operating Conditions
Temperature
Humidity
- 5 to + 55 °C
5 to 85% non-condensing
Mechanical
1U 19” Rackmount
1.5U 19” Rackmount
44 x 483 x 240 (H x W x D, mm)
66 x 483 x 240 (H x W x D, mm)
Power Consumption
< 75W (23 BTU/H)
Order Matrix
MTS10080
10 Gigabit Carrier Ethernet Switch
Description
4x10G model with integrated optical
WDM tray MTS1080-24-4-1.5R
Code
Model
8x10GE SFP+ ports, 8x10GE XFP ports, no FEC,
without SFP and XFP ; MTS10080 service card,
redundant DC power. CLI/SNMP/GUI management
7000-201
MTS10080-L
20x10GE SFP+ ports, 4x10GE XFP ports, no FEC,
without SFP and XFP ; MTS10080 service card,
redundant DC power. CLI/SNMP/GUI management
7000-202
MTS10080-H
MTS10080 5RU 19'' chassis with redundant DC
power and CLI/SNMP/GUI management included
7000-203
MTS10080-Chassis
Please Order pluggable SFP/XFP and optical MUX/DEMUX or OADM tray separately.
25