1
Download PeakNet-PA Software User`s Guide
Transcript
6 • The Method Editor Set the UV Lamp or Visible Lamp to Off, Low, or High. Turning both lamps Off disables the AD20 timed events. Use Off to shut down the AD20 at the end of a Schedule. 6.7.8 AD25 Absorbance Detector Controls in the AD25 Editor and Lamps dialog boxes are identical to those in the AD20 dialog boxes, except that the lamp settings are Off and On only. Refer to the preceding section for a description. For more information about the detector, refer to the AD25 Absorbance Detector Operator’s Manual (Document No. 031647). Doc. 031322-02 2/02 6-35
