1
Download Audiocodes 320HD Admin Guide
Transcript
320HD IP Phone 4.2.3 Provisioning Parameters Table 4-7: Provisioning Configuration File Parameters Parameter Description Note: To add a value to these parameters, enter provisioning/ followed by the parameter name equals the value (e.g. provisioning/method=dynamic). provisioning/method provisioning/firmware/ur l Defines the provisioning method: [Disable] Disable - Automatic update is disabled. The phone attempts to upgrade its firmware and configuration [Dynamic] DHCP Options (Dynamic URL) (default) - Using DHCP options 160 or 66/67 for provisioning [Static] Static URL - Using Static URL for provisioning The static URL for checking the firmware file. The URL must be entered using one of the following syntax options: <protocol>://<server IP address or host name> <protocol>://<server IP address or host name>/<firmware file name> Where <protocol> can be one of the following protocols: “ftp”, ”tftp”, ”http” or “https”. For example: tftp://192.168.2.1 – retrieved firmware file is 320HD.img ftp://192.168.2.1/Different_Firmware_Name.img - retrieved firmware file is Different_Firmware_Name.img Note: This parameter is applicable only when method is configured to “Static”. provisioning/configurati on/url The static URL for checking the configuration file. The URL must be entered using one of the following syntax options: <protocol>://<server IP address or host name> <protocol>://<server IP address or host name>/<configuration file name> Where <protocol> can be one of the following protocols: “ftp”, ”tftp”, ”http” or “https”. For example: http://192.168.2.1 - configuration file name is <MAC Address>.cfg, for example, 001122334455.cfg https://192.168.2.1/320HD_<MAC>_conf.cfg - retrieved configuration file name is 320HD_<MAC Address>_conf.cfg, for example, 320HD_001122334455_conf.cfg Note: This parameter is applicable only when method is configured to “Static”. provisioning/period/type provisioning/period/hour ly/hours_interval Defines the period type for automatic provisioning: [hourly] Hourly - Sets an interval in hours. [daily] Daily (default) - Sets an hour in the day. [weekly] Weekly - Sets a day in the week and an hour in the day. [powerup] On Power-up Only - The phone tries to upgrade only after power-up. The interval in hours for automatically checking for new firmware and configuration files. The valid range is 1 to 168. The default is 24. Note: This parameter is applicable only when type is configured to “hourly”. Administrator's Manual 62 Document #: LTRT-08107
