Download Acute

Acute
Operations
those of tested signals.
Hence, “AUTOSET” button is used to adjust Volt, Time,
and Trigger of DS-1000 for tested signals and display the signals’ waveform more
quickly.
“AUTOSET” button, when pushed, will find the parameters of the
channel being activated.
For example, if the “Channel Switch” button is on CH1,
then, the Volt, Time, and Trigger of CH1 signals will be benchmark parameters for
“AUTOSET” function.
Panel Switch button
Panel Switch Button
There are 2 display modes for DS-1000 AP panel; one
is full panel, with function buttons on the right of the
panel, the other is skin panel, with function buttons
hidden.
“Panel Switch” button is used to switch
DS-1000 AP from full panel to skin panel or vice versa.
There are some different operations for these 2 panels.
Main Function area
Sub-Function area
─21─