Download Acute

Functionality
Save/Recall
The save/recall waveform is used to show contrasts. There are four
groups that the reference waveform can use. The method of use is to
enter “save/recall” in the conversation box, then save the waveform
to file. In the conversation box, use the save file waveform to put into
the reference waveform. The save file waveform will represent the
reference waveform model, which will appear in the waveform area.
The following figure is the save/recall conversation box.
“Save/Recall” has another sub-function, “Setup”, which means a set
of parameters such as Time/Div, Volt/Div, Ground Offset,
Threshold, Focus Channel… etc. There are four Setups; and each
Setup, with its own time tag, is easy to save, load, clear, or
distinguish. You may create more Setups, up to 35 sets, in “Hot
Key Setting” or even more sets in “Export data” and “Import data”.
─32─