Download OPERATION MANUAL

15.Synchronizing external Hardware and
Software
TRAKTOR 3 allows you to send a tempo signal to other computers and/ or MIDI
devices through the use of MIDI Clock.
15.1 MIDI-Clock
Currently, TRAKTOR 3 can only send MIDI-Clock, it will not receive it. Connect
the MIDI output of your interface to the MIDI input of your external module or
MIDI device.
► Open TRAKTOR “Preferences” > “External Sync” > “MIDI Clock”.
► Drop down the Interface menu and select your MIDI interface.
► Put a check mark in the box labeled Send MIDI Clock.
► Use the MIDI Clock Time Offset slider to compensate for any latency.
► Choose OK.
► Insert the Clock panel into the Details section.
► Click the Send button.
► MIDI-Clock will then be sent to the output of your MIDI device.
TRAKTOR 3.3 – 143