Download CAAPE User`s Manual

Transcript
Using the Graphical Simulator
Click on the toolbar’s header and use Tool Tips to identify the device type for each
button. To add devices to the track plan, simply drag them from the toolbar onto the
track plan.
When a device is placed on the track plan right clicking on it produces a popup menu of
available operations. Multiple devices can be selected for some operations by using the
mouse to drag a box around them, or by clicking on them with the Ctrl key held down.
Cut, copy and paste can be used to copy existing devices. If multiple devices are cut or
copied and then pasted at the same time, the pasted devices are placed on the screen
relative to the position of the device whose popup menu was used to do the cut or copy.
For example, if two devices are selected and the rightmost device is right clicked to do
the Copy, when a paste is done the rightmost device is placed at the paste position and
the other device is placed to its left.
Devices can be moved by dragging them to their new location. To move multiple
selected devices, hold down the Ctrl key while dragging.
10.9.3.2
Editing Device Properties
Device properties include display options and assigned variables. Once a device is
placed on the track plan, open the device by double clicking on it or by going to
Properties on its popup menu.
The General tab is used to view or set the variables assigned to the device functions.
Figure 10–17. Device Properties - General
P2512A, Rev. F, Nov/13
10–27
Alstom Signaling Inc.